Legacy equipment
This section includes the following:
- Monitoring units and PDUs (legacy)
- VT855i & VT855ii / Data Center Monitoring Unit (v1)
- Introduction (legacy)
- Installation and Quick Configuration Manual (legacy)
- Monitoring units (VT series) (physical description) (legacy)
- VT200 / Room Guard
- VT300 / Room Guard
- VT335 / Monitoring unit (v1.2)
- VT470 package content
- VT604 / Switched PDU (v1.1)
- VT800 / Monitoring unit
- VT8101 / Remote Monitoring System
- VT8101T / Telecom monitoring unit
- VT8110 package content
- VT8110 / Monitoring Unit with PDU
- Monitoring units panels VT8101, VT8101T, VT8110, VT800
- VT825 / Monitoring unit (v1.3)
- VT900, VT900 DC / BTS monitoring units
- VT960, VT960 DC / Corporate monitoring units
- Monitoring units (SC series) (physical descriptions) (legacy)
- (Previous version) Front panel SC81XX
- (Previous version) Front panel SC8100
- (Previous version) Back panel SC8100
- (Previous version) Back panel SC8110
- (Previous version) Front/back panel SC2100
- (Previous version) Front/back panel SC408
- (Previous version) Front/Back panel SC450
- (Previous version) Front/back panel SC2110
- Connecting "VT85 / Modbus extension board"
- VT470 / PIR, vibration and temperature sensor
- VT800 package content
- Connecting alarm beacons
- Connecting relays (VT81XX series)
- VT417 / AC current meter 20A
- Connecting VT920 / GSM modem
- VT16 Dry contacts board mounting
- VT416 / DC current monitor
- USB485 / RS-485 to USB adapter (Inventory)
- Initial configuration (web interface) (legacy)
- Creating groups of elements (v2.0.1 - v2.2.5)
- Adding logic schemes (v2.0.1 - v2.2.5)
- Creating floor map (v2.0.1 - v2.2.5)
- Interface overview (v2.0.1 - v2.2.5)
- User access and permissions (v2.0.1 - v2.2.5)
- Network settings (v2.0.1 - v2.2.5)
- Quick configuration (Web interface) (legacy)
- Settings up time (v2.0.1 - v2.2.5)
- Adding IP camera (v2.0.1 - v2.2.5)
- Sensor configuration (v2.0.1 - v2.2.5)
- Setting up Dynamic DNS (v2.0.1 - v2.2.5)
- Creating ping (v2.0.1 - v2.2.5)
- Creating timer (v2.0.1 - v2.2.5)
- Access control (v2.0.1 - v2.2.5)
- Setting up GSM modem (v2.0.1 - v2.2.5)
- Logs export setting (v2.0.1 - v2.2.5)
- Outlet management in PDU (v2.0.1 - v2.2.5)
- Saving system logs to SD card (v2.0.1 - v2.2.5)
- DC HOS-100Q1 and VT406
- VT450 / Airflow unit
- VT581 / Outdoor temperature sensor
- VT585 / Termocouple converter
- VT591 / Water leak rope sensor (Legacy with WDC)
- GPS location
- Monitoring units (VT series) (physical description) (legacy)
- Setting up CAN (v2.0.1 - v2.2.5)
- Upgrade and restore options (legacy)
- Inventory (legacy)
- HOS-100Q1 package content
- VT406 package contents
- VT531 package content
- VT581 package content
- VT583 package content
- VT710 package content
- VT8101 package content
- VT8101T package content
- VT920 package content
- VTX16 package content
- VT417 package contents
- VT336POE package content
- VTx40 package content
- VT325 package content
- VT335s package content
- VT700 package content
- VT85 / Modbus extension board (Inventory)
- VT10 / 1-Wire Board (Inventory)
- Management software (legacy)
- VT700 / GSM modem
- VT531 / IR access sensor
- VT510 / Humidity sensor (v2)
- VT18 extension board
- VT10 / 1-Wire board
- Comparison chart: Master modules (legacy)