Integration with 3rd party software and hardware

SNMP (Simple Network Management Protocol)

Send data to your SNMP IT infrasstructure monitoring software, NMS (network managment software) software using an SNMP agent and sub-agents.

SNMP manual

Integration of Vutlan monitoring system in NMS

Management scripts examples

SNMP Get

Read data from external equipment via SNMP PDU GET (v2c)

SNMP Trap notification

Send a notification to one or more trap receivers onto a specified IP address

Vutlan open Rest-API (Application Programming Interface)

Allows two applications to talk to each other. API simplifies programming. Can be used for communication with your own applications/software. The query is sent as a HTTP POST request and consists of fields. The response from the server part to the client part is transmitted as a string in XML format.

Rest-API in JSON format

API requests in JSON format

HTTP request

Send an HTTP request to the specified server.

Modbus RTU

Used to read and write data from external equipment via Modbus RTU protocol using a twisted pair line (RS-485). Such equipment can be sensors/meters or devices/systems/units.

Modbus TCP/IP

Used to read and write data from external equipment via Modbus TCP protocol over LAN (local area network). Such equipment can be sensors/meters or devices/systems/units.

enables communication among many devices connected to the same network

4-20mA sensors/meters

VT420 / 4-20mA converter is used for measurement of constant current on 4-20mA from different sensors/meters/devices and converting data into the format of an IP monitoring system. The system interface allows you to assign the sensor and introduce the function data conversion.

Sensors with outputs:

0-4V,

0-5V,

0-10V,

0-15V,

0-75V,

VT410 / DC monitor is used for the measurement of DC voltage and converting data into the format of the IP monitoring system. The system interface allows you to assign the sensor and introduce the function data conversion.

12V DC, max 0,25mA devices

Connect low-current devices, (For example, alarm beacons, sirens, strobe and other).

12V DC, max 5A

VT11 / Relay contact can be connetced to 12V outputs and control an amperage up to 5A. (For example, switching ON/OFF air conditioners, power magnetic locks, bolt locks, solenoid electromagnets, siren, light source, heater, etc.)

Dry contact inputs

Monitor voltage-free contacts For example HVAC (Heating, Ventilation, and Air Conditioning) units, BMS (battery monitoring systems),

Dry contact outputs

Optically isolated contacts can send a signal to a system/device/unit.

NO/NO/COM relays

Control x2 loads managed by built-in latching relays. Control AC/DC mains (lamps, fans, motors, or other devices.).

RADIUS

Work with a centralized database for authentication (verification of authenticity) and authorization (determining access rights) of users.

Web SMS

Send messages through special services. Vutlan monitoring unit sends a request to such a service, which in return sends an SMS to the recipients, depending on the API in the request.

RTSP IP cameras

Uses H.264 codec and records video on SATA HDD, SD card, or USB flash drive.

IP cameras

You can view IP cameras with JPEG / MJPEG video stream compression format. Record mode is not possible.

AV camera

Record videos on SATA drive.

USB cameras

You can view and record USB webcams of the UVC standard with support for hardware compression in MJPEG