VT470 / PIR, vibration and temperature sensor v1 (legacy)

Physical description

1. "CAN" - two equivalent digital RJ12 connectors for connecting CAN sensors and CAN extensions to a common bus, with auto-sensing.

2. Sensitivity (see instructions in a section below)

3. "Wall holder" - attachment place

4. "TR" - CAN bus terminator.

5. "Christal window"

6. Indicators: "Green" - shows the status "connected" to the main module, "Red" - shows the status "not connected", and "Orange" - shows the status of "Alarm".

7 "Wall holder" - supplied together with the sensor.

Product page

See more on VT470 product page

Connecting the sensor

The sensor can be connected in a CAN chain with other CAN sensors.

TR is OFF. Used if the sensor is not the last sensor in a CAN chain.

TR is ON. Used if the sensor is the last sensor in the CAN chain.

VT470 package content

Make sure that the contents of the delivery meet the following configuration. Report a missing or damaged component to your supplier. If damage occurred during transportation, contact the appropriate delivery service.

	Package content	Description
1		x1 Sensor with x1 wall holder
2		RJ11 6P4C 2m cable
3		x2pcs M3.5 L17.5mm countersink screws

Settings up CAN

Unable to render {include} The included page could not be found.

Copyright:

Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic

http://www.vutlan.com