/
SC8100 Remote monitoring system (legacy)

SC8100 Remote monitoring system (legacy)

 

1. "LAN" - Ethernet 10/100 Base-T port, provides an Ethernet connection.

• LEDs - "yellow" (status) and "green" (traffic) show the network traffic. The status LED: flashes green when the system starts up, and shows the connection state (constant green light - the connection is established, blinking green - the connection attempt).

2. "USB" - type A USB-port 2.0, is required for a USB flash drive to upgrade an appliance.

3. "HS" - type miniAB USB-port 2.0, required to connect a USB camera or to restore an appliance.

4. "Reset" - resets the appliance.

5. "SD" - SD card connector with ejector, needed to store data.

6. LEDs: "ACT" - indicates appliance status, "CN1" - indicates CAN1 bus traffic, "CN2" - indicates CAN2 bus traffic, and "ERR»" - indicates error and traffic.

• Blinking "ACT" ............ • Blinking "CN1" ............ • Blinking "CN2"............ • Blinking "ERR»" ..........

7. "CAN" - two equivalent digital connectors RJ12 for the connection of CAN sensors and CAN extensions on a CAN bus, with auto-sensing.

8. "TR" - labeled as "1" on this module. Needed for connection of CAN sensors.

9. "A1..A8" - 8 RJ12 analog sensor inputs with auto-sensing.

10. "SIM" - connector with an ejector, used when a GSM modem is installed inside of the appliance to connect a SIM card.

11. "Outputs 1..4" - 4 relays status indicators.

12. "1-Wire" - RJ9 connector for 1-Wire I-touch I-Button readers with auto-sensing or for Alarm Beakon / Siren connection.

13. "SMA" - connector, used when GSM modem is installed inside of the appliance to connect the GSM antenna.

14. "AC line" - power input 240V. IEC C14 connector.

15. "Fuse" - type 5*20mm

16. "RLY1...RLY4" - 4 relays output connectors. The relays maximum power output - 5A * 240V.

17. "SMA" - optional hole for mounting SMA antenna of GSM modem.

18. "DC 12V" - backup power socket, to connect a battery or a battery backup.

19. "Dry contacts" - empty slot for dry contacts module SC16, used to connect dry contacts on doors, windows, etc.

Related content

SC81XX Remote monitoring systems (legacy)
SC81XX Remote monitoring systems (legacy)
More like this
SC2110 Remote Monitoring System (legacy)
SC2110 Remote Monitoring System (legacy)
More like this
SC2100 (legacy)
More like this
VT8101 / Remote Monitoring System (legacy)
VT8101 / Remote Monitoring System (legacy)
More like this
VT8101T / Telecom monitoring unit (legacy)
VT8101T / Telecom monitoring unit (legacy)
More like this
VT8110 / Monitoring Unit with PDU (legacy)
VT8110 / Monitoring Unit with PDU (legacy)
More like this