VT510 / Humidity sensor
- Vladimir Tayzhev
- Vasily T.
- Admin1
Product page: https://vutlan.com/analog-sensors/16-vt510-humidity.html
Datasheet page: https://vutlan.atlassian.net/l/cp/121FNA2f
 |  |
Function and purpose
The sensor is needed for the measurement of relative humidity of 10-95% indoors. VT510 relative accuracy is 3%.
VT500 is an analog plug-and-play sensor.
Can be connected to any analog port (A1...A8) of the Vutlan monitoring unit.
The maximum amount of sensors connected to a Vutlan monitoring unit and the maximum length away from the monitoring unit can be extended using the "VT408 / Sensor extension unit"
Technical specifications
VT510 | ||
|---|---|---|
| 1 | Product dimensions | (Length, Width, Height) 60×18×18 mm |
| 2 | Measures | Relative humidity |
| 3 | Power Consumption | 60 mW |
| 4 | Operating temperature | Temperature: Min. -10° C - Max.+80° C |
| 5 | Operating humidity | 10-95% indoors |
| 6 | Mounting possibilities | Desktop and Wall mount |
| 7 | Max. distance from the unit | 50 m |
| 8 | Manufactured in (country) | Manufactured in Slovak Republic, E.U. |
| 9 | HS Code | 9025 11 800 |
| 10 | Accuracy | 3% RH |
| 11 | Inputs terminals | RJ-12 / RJ-11 |
Drawings
Package includes
Connecting vibration sensor
The sensor uses a standard Vutlan analog sensor cable for connecting to the monitoring unit. You can find further instructions at Analog sensors connection
Installation using a sticker and a bracket
Option 1.
There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.
Cut the round bump using a knife so that the bottom of the plastic enclosure will be flat.
Option 2.
a) Stick the mounting sensor to the surface using the sticker.
or
b) Stick a sensor to the surface using a screw.
Option 3.
Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.
Cable pinouts
The sensor uses a standard Vutlan analog sensor cable for connecting to the monitoring unit. You can find further instructions in our online documentation: Analog sensors connection
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic