/
Using terminal connectors

Using terminal connectors

Owned by Vladimir Tayzhev
May 11, 2021
2 min read

The system uses terminal blocks for several interfaces:

  • x4 dry contact inputs

  • x2 Electronic relay outputs

  • x2 Isolated digital outputs

  • RS-485 Modbus RTU

  • Power supply input

They share the same characteristics.

Specifications

Strip length

Wire cross-section

Screw head

Terminal blocks

Step: 5.08 mm

6 - 7 mm

0.23 - 0.27 in

2.5 mm²

0.09 in²

#26 - #12 AWG

Flat

3.5 mm

0.13 in

Using the table above, you can mount the cables.

Related content