VT540 / Vibration sensor v2
Product page: https://vutlan.com/analog-sensors/19-vt540-vibration.html
Datasheet page: https://vutlan.atlassian.net/l/cp/jzDSR4KK
|
---|
Function and purpose
Detects vibration. For installation on walls, windows, etc., the sensor controls vibration. For example, detects the breaking of the window by an intruder if installed on the window glass.
Can be connected to any analog port (A1...A8) of the Vutlan monitoring unit.
The maximum amount of sensors and maximum length can be extended using the VT408 / Sensor extension unit.
Technical specifications
Feature | Description |
---|---|
Sensor type | Analog sensor |
Measures | Vibration |
Chain connection | No |
Cable length | RJ11/RJ12 6P4C 2m telephone cable included |
Dimensions | 60×18×18 mm |
Weight | 60 g |
Output | RJ11 / RJ12 (6p4c) |
Operating temperature | -10 °C to +80 °C |
Operating humidity | 5 to 95% (Non-Condensing) |
Mounting | The mounting bracket, sticker, and screws are included. Installed on the surface where possible vibration is possible. E.g. windows, doors, etc. |
Power consumption | 60mW |
Max. distance m | 150 m |
Manufactured in | Slovak Republic, E.U. |
HS Code | 9025 11 800 |
GTIN |
Package includes
Drawing
Connecting vibration sensor
The sensor uses a standard Vutlan analog RJS5 RJ11 sensor cable for connecting to the monitoring unit.
Installation using a sticker and a bracket
Option 1.
There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.
Cut the round bump using a knife so that the bottom of a plastic enclosure will be flat.
Option 2.
a) Stick the mounting sensor to the surface using the sticker.
or
b) Stick a sensor to the surface using a screw.
Option 3.
Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.
Configuring the sensitivity of the sensor
It is possible to change sensor sensitivity. Please ask us for schematics.
Additional reading
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic