System Log & Event log panel

Page contents

Child pages

Event log introduction

A list of the latest system events is available in the "Event log" menu.

Event log capacity

The current table represents monitoring system capacity without enabling FTP, SD card, or USB flash drive.

Event log capacity

Models

Event log capacity

Models

200

V325, VT335, VT825, VT604

300

VT225t, VT335t, VT604t, VT608t, VT825t, VT855t

500

VT900, VT960, VT960i

Event log capacity for current models can be viewed at Comparison chart: Master modules >> “Web interface (panels)” >> “Event log panel: amount of logs”.

The list of events in the web interface exists until the system reboots. When updating or synchronizing the system time, the list of events is cleared.

If you want to increase log capacity, you may enable SD card, FTP or USB flash logging.

The event log is stored in temporary memory. In case the unit is restarted, the event log will be lost. That is why we advise to use SD card, FTP or USB flash for logging. This ensures that all log files are saved.

Download event log

By clicking on the Vutlan web interface >> Event log panel >> in the top right corner >> Modal window will open >> “Save log to disk”, you can download the current contents of the log or clear it.