Onboard sensors

Types of onboard sensors

Each Vutlan monitoring and control system has built-in onboard sensors. The type of sensors and their quantity varies from system to system.

Icon

Onboard sensor

Description

Icon

Onboard sensor

Description

Alarm LED

Alarm LED can be programmed by the system using logic schemes.

Read more at LED indication

Analog sensor power reset

If analog sensors like VT560 / Smoke detector/ sensor detects smoke or fire, it will go into Alarm mode. Alarm mode can only be switched off manually using the Reset smoke detectors panel or using this onboard sensor Analog sensor power reset.

Read more at Sensor configuration | Reset smoke sensors

This sensor can be used in logic schemes of the system to program the reset of power for smoke sensors.

Onboard temperature

This temperature sensor may be located inside the enclosure or sticking out of the enclosure depending on Vutlan monitoring system model.

It can be used in logic schemes to program notifications and actions.

Voltage 1

Voltage 2

Main and reserve power supply voltage sensors. These elements can be used to program the notifications and actions in logic schemes.

Read more at Using onboard voltage sensors

How do I find which sensors can be accessed on my Vutlan monitoring system?

  1. The types of sensors used in each sensor can be found in this table https://vutlan.atlassian.net/wiki/spaces/DEN/pages/705855489 and Comparison chart: PDUs VT604 & VT608.

  2. You can also access all available onboard sensors through a Vutlan Web Interface of the system in the System tree panel >> System group vertical group tab >> Onboard vertical tab