VT510 / Humidity sensor (v2) (legacy)
Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1841463297/VT510+Humidity+sensor+v2
Product page: https://vutlan.com/analog-sensors/16-vt510-humidity.html
 |  |
Function and purpose
The sensor is needed for the measurement of relative humidity 0-95% indoors with a relative accuracy of 3%RH.
Technical specifications
VT510 | |
|---|---|
Product dimensions | (Length, Width, Height) 60×18×18 mm |
Power Consumption | 60 mW |
Operating temperature | -40° C to +100° C |
Operating humidity | 0 to 95 % |
Storage temperature | -40° C to +100° C |
Storage humidity | 0 to 95 % |
Mounting possibilities | Desktop and Wall mount |
Max. distance from the unit | 50 m |
Manufactured in (country) | Manufactured in Slovak Republic, E.U. |
HS Code | 9025 11 800 |
Special Features | Accuracy 3% RH |
Inputs terminals | RJ-12 / RJ-11 |
Certifications | GPSD, ROHS, CE, Quality certificate |
Package includes
Drawing
Connecting vibration sensor
The sensor uses a standard Vutlan analog RJS5 RJ11 sensor cable for connecting to the monitoring unit.
Analog sensor connection
Installation using a sticker and a bracket
Option 1.
There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted together with the on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.
Cut the round bump using a knife so that the bottom of the plastic enclosure will be flat.
Option 2.
a) Stick the mounting sensor to the surface using the sticker.
or
b) Stick a sensor to the surface using a screw.
Option 3.
Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.
Connecting the sensor
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic
www.vutlan.com