Connecting the device by IP
- Vladimir Tayzhev
- Vasily T.
- Admin1
Contents
Access the unit web interface using a browser
System configuration and monitoring are done through a web interface. To access the web interface you need to enter an IP address or a name in a command line of your browser to which your system is bound to.
Please use any of Firefox, Chrome, or Safari as web browsers. The interface has an HTML5 platform that is not fully supported by IE.
Open the browser
Type in the IP address of the unit into the browser.
Hit "Enter" to access the page.
Default network settings
The factory network settings of the device:
Parameter | Factory setting |
DHCP client | switched off |
Hostname | Vutlan |
The IP address of | 192.168.0.193 |
The IP address of | 192.168.0.101 |
Network mask | 255.255.255.0 |
Broadcast | 192.168.0.1 |
Gateway | 192.168.0.255 |
Primary DNS | 192.168.0.1 |
To start working with the appliance your PC must be in the same network as the new appliance! To do this please set up on your PC:
subnet mask: 255.255.255.0
IP-address: 192.168.0.XXX, where XXX = number from 0 to 192, from 194 to 254
To configure network settings on your PC, follow these steps: “Windows” >> “Start” >> “Control panel” >> “Network Connections” >> Right-click on your LAN “Local Area Connection” >> “Properties” >> double click on Internet Protocol (Internet Protocol TCP / IP)
