VT325 / Mini monitoring unit (legacy)

Owned by Vladimir Tayzhev
Last updated: Oct 27, 2022

  End of Life:  30.10.2022


Product page: https://vutlan.com/remote-monitoring-units/69-vt325-room-guard.html


1. "A1..A2" - 2 RJ12 analog sensor inputs with auto-sensing.

2. "LAN" - Ethernet 10/100 Base-T port, provides Ethernet connection.

• LEDs - "yellow" (status) and "green" (traffic) show the network traffic. Tdfhghfghfghnce.

3. "USB" - type miniAB USB-port 2.0, required to connect a USB camera or to restore an appliance.

4. LEDs: "ACT" - indicates appliance status, "E1" - indicates 12V E1 relay status, "E2" - indicates 12V E2 relay status, "ERROR" - indicates error and traffic.

5. "RESTART" - restarts the appliance.

6. "TEMPERATURE SENSOR" - accuracy +/- 1 °C.

7. "" - Grounding.

8. "Dip switch" Normal ↑ Off - the system should be always switched to this mode.

Recovery ↓ On - use this option only in case you need to recover manufacturing settings.

9. "OUTPUT 12V 0.25A" - 12V 0.25A output electronic relay teminal

10. "DRY CONTACTS 1...2" - Dry contacts terminal (type IN)

11. "DC 12V 2A" - DC power input.

12. "1-WIRE" - can be used with VT10 / 1-Wire extension board". Allows connecting 1-Wire reader or 1-Wire temperature sensors in serial line. Has "1-WIRE" status led.


Inventory

VT325 package content (legacy)




Developer notes: metal case v1.1