/
Buttons and switches

Buttons and switches

Restart button

The button restarts the appliance. Hold the button for 2 seconds and then let go, and the system will restart.

Applicable for: All Vutlan systems

Factory reset button

This resets settings to the default factory settings. Keep pressing the button for more than 5 seconds. The “ERR” LED will start blinking, indicating that the factory restoration has started. Wait for 20-60 seconds for the system to restart. Once the system has restarted, the “ACT” LED will start blinking. The device can be accessed now.

Applicable for: All Vutlan systems

Dip switch N… R

  • Normal mode: The switch is switched to the left ←. The switch should always be in this position.

  • Restore of appliance: The switch is switched to the right →. Used to load the clean system image from an SD card. Read instructions at “Restore of appliance”