Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/335708171/VT550+Wind+velocity+meter
Product page: https://vutlan.com/analog-sensors/102-vt550-wind-speed-meter.html
Function and purpose
At installation on Air conditioners, fans, and other places to measure wind (airflow) velocity. Sensor controls airflow 0 - 3 m/s. The product page can be found here: "VT550 / Wind velocity meter"
The sensor can not be used on its own. It must be used together with Vutlan monitoring systems.
Safety Instructions
Regularly check that the meter is not covered with dust.
Package contents
Package includes:
Package content | Description | Quantity | |
|---|---|---|---|
1 |  | Wind velocity meter D6F | 1 pc |
2 |  | Terminal cable (3pin RJ9 to JST 1mm) | 1 pc |
3 |  | Wind velocity sensor | 1 pc |
4 |  | Metal bracket | 1 pc |
5 |  | Telephone cable 2m | 1 pc |
6 |  | Screws B4,8*13 | 1 pc |
7 | | Screws B2.9x16 | 2 pcs |
8 |  | Bolts М3x12 | 2 pcs |
9 |  | Nuts М3 | 2 pcs |
10 |  | Sticker | 1 pc |
Connecting optical access sensor
Connect the meter using RJ9 (4p4c) jack to 3 pin JST jack to the sensor.
Connect one end of the RJ11 / RJ12 cable to the monitoring unit into any analog ports (A1...A8) and the other end of RJ11/ RJ12 to the meter.
The sensor is plug-and-play and it will appear automatically in a "System tree" of the web interface.
.jpg?version=1&modificationDate=1523612205214&cacheVersion=1&api=v2&width=680&height=184)
Installation inside a rack or cabinet using a bracket
Mounting bracket
The mounting bracket is supplied with each "VT550 / Wind velocity meter". Use a wire cutter and pliers to cut and bend the bracket to Your needs.
.jpg?version=1&modificationDate=1523612204156&cacheVersion=1&api=v2&width=550&height=272)
Installation
The sensor measures the speed of the wind. If you install it too far away from the the air-conditioner, there will be no wind velocity or very little.
It is best to install the sensor as close as possible to the origin of the wind. The sensor should work in the stream and the correct installation distance should be obtained by trial and error.
The bracket steel thickness is 0.8 mm. Below You can find how users can mount the "VT550 /Wind velocity meter" with such a bracket.
.jpg?version=1&modificationDate=1523612206538&cacheVersion=1&api=v2&width=680&height=357)
Cable pinouts
"RJ11/RJ12" to "RJ11/RJ12" cable pinouts:
%20pinouts%20cable.jpg?version=1&modificationDate=1523611789515&cacheVersion=1&api=v2&width=734&height=416)
RJ9 4p4c to 3-pin JST cable pinouts:
.jpg?version=1&modificationDate=1524130693422&cacheVersion=1&api=v2&width=734&height=547)
Technical specifications
VT550 / Wind velocity meter | |
|---|---|
Dimensions | 600×18x18 mm |
Weight | 106 g |
Inputs | RJ9 (4p4c) |
Outputs | RJ11 / RJ12 (6p4c) |
Operating temperature | Min. -10° C, Max.80° C |
Operating humidity | Min. 5% - Max. 95% (Non-Condensing) |
Mounting | Mounting bracket included for installation inside IT racks and cabinets |
Power consumption | 60mW |
Max. distance from the monitoring unit | 50 m |
HS Code | 9026 80 200 |
Components | Manufactured in E.U. |
Special features | Response time 0.1 sec. |
Other | The sensor is sold with preconfigured sensitivity. |
Drawings
Analog sensor connection
This section includes child pages:
- VT410 / DC voltage monitor
- VT420 / Converter 4-20mA
- VT500 / Temperature sensor
- VT510 / Humidity sensor
- VT501 / Outdoor temperature sensor
- VT520 / AC voltage monitor
- VT520DIN / AC Voltage monitor (link)
- VT530 / Access sensor
- VT540 / Vibration sensor
- VT550 / Wind velocity meter
- VT560 / Smoke detector
- VT570 / PIR sensor
- VT572 / Radar microwave motion sensor
- VT591 / Leak sensor & WLC / Leak detection cable
- VT593 / Spot leak sensor
- VT594 / BMS leak water sensor
- Chain connection of analog sensors
Connecting analog sensors
Connect the analog sensor by a supplied RJ-11 (6P4C) cable to any analog port "A1 .. A8" or "Sensor" port. The determination of the sensor type and connection will occur automatically.
.jpg?version=1&modificationDate=1707204636707&cacheVersion=1&api=v2&width=760&height=433)
If strong electromagnetic interference is present, we recommend using a 3-pair cable CAN FTP for sensor connection!
6P4C RJ11 cable wiring/pinouts
%20pinouts%20cable.jpg?version=1&modificationDate=1707204779856&cacheVersion=1&api=v2&width=760&height=431)
1- Yellow, 2- Green, 3- Red, 4 - Black
Colors are true for this telephone cable. Both ends match the colors and pinouts (identical).
Please refer to the RJ connectors comparison table:
Daisy chain connection
Some of the analog sensors can be connected to a daisy chain. Please refer to the article "Chain Connection of analog sensors".
Maximum cable length test
ok = tested
x = failed
Model | 50m | 100m | 120m | 150m | 200m | |
|---|---|---|---|---|---|---|
VT407 | AC current converter | ok recommended | ok | |||
VT410 | DC voltage monitor | ok | ||||
VT420 | Converter 4-20mA | ok recommended | ok | |||
VT500 | Temperature sensor | ok | ok | |||
VT501 | Outdoor temperature sensor | ok | ok | |||
VT510 | Humidity sensor | ok | x | |||
VT530 | Access sensor | ok | ||||
VT540 | Vibration sensor | ok | ||||
VT550 | Wind velocity meter | ok | x | |||
VT560 | Smoke detector | ok | ||||
VT570 | PIR sensor | ok | ||||
VT590 | Spot water detector | ok | ||||
VT591 | Water leak sensor | ok |
Extending the number of analog sensors
Using CAN extension "VT408 / Sensor extension unit" it is possible to increase the number of analog sensors connected to the monitoring unit up to 80 sensors.
.jpg?version=2&modificationDate=1707204813374&cacheVersion=1&api=v2&width=723&height=579)
Additional articles of interest
Sensor configuration
Settings tab
To configure a sensor, go to "Main menu" >> "System tree" and click on the sensor element in the tree. A modal window with sensor properties will pop up. Change the needed settings and click "OK" or "Apply" at the bottom of the "Properties" window.
All sensors include:
1 | Name | The name is given by the system automatically. You can change it to anything you want. |
3 | ID | System ID of the element. |
4 | Type | Examples: temperature, humidity, vibration. |
5 | Class | Examples: analog, CAN, switch, discrete. |
6 | Hardware port | The external port number on the device panel to which the sensor is connected (if the sensor is external). |
All sensors have threshold controls:
In the picture above, the "Current value" equals 41.0 and is represented by the small triangle. Currently, the triangle is green because it is situated in the "Normal" range. Hence the sensor says that the "Current state" is "Normal". This value is used by the system's "Logic schemes" menu to notify the administrator or take action.
Hysteresis
Sensors have the option of setting the hysteresis state. Hysteresis can be a time, a value or it can be disabled.
If the hysteresis is set in time, the sensor will transmit to a new state with a delay of the specified number of seconds in the corresponding field. The time counting will begin from the moment when the measured value of the sensor has left the current range.
Each state has its own field. Which determines the time that the sensor value must continuously hold for the state to change to the specified.
If you set the hysteresis by value, the sensor transition to a new state will occur when the measured value of the sensor exits beyond the current range, adjusted for the specified hysteresis value.
You can calibrate the sensors. Use K and B coefficients. After the calibration, please, save the values in flash memory.
To save sensor properties in the device's flash memory press " 
" then "OK" to confirm.
Example: Why do we need to use Hysteresis
Let’s say that we have a temperature sensor. Let’s say that we have set up threshold values.
We have set the value 25.5 °C to be a threshold value between Normal/Alarm states.
If the temperature drops just below 25.5 °C You will have a “Normal” state.
If the temperature goes just above 25.5 °C You will have a “Warning” state.
Sometimes the temperature may stay at 25.5 °C and jump up and down by 0.1-0.3 °C. In this case, You will get too many notifications that the sensor is showing a Warning or Normal state.
In this case, we need to use a Hysteresis.
If the type “time” is chosen, the system will wait for a specified time before the State of the sensor is declared.
If type “value” is used, unless the temperature drops by a larger amount than specified, the sensor state will not be declared.
Tuning the sensor value
Sensor readings can be tunned by a linear formula "y = k * x - b"
Example VT407 + HAT-100Q1 / AC current converter:
Metered current for HAT: from 0 to 100A (This means that the range equals 100, k = 100)
The output of VT407 is 0-5V (That means that the range is equal to 5)
"b" = the value that the sensor shows in WebUI when there's no current. Let's say that b = + 0.021
You should use the following formula for HAT: 100/5*(x-y)
The expression formula would be 20*(x-0.021)
Point is used as a decimal separator (3.14)
Charts tab
The charts tab shows the following:
Display chart for |
| |
Refresh data | Start | Poll a sensor |
Reset all charts | Reset all | Clears all saved data for the sensor. |
Export data | XML or CSV | Exporting data through WebUI does not work for more than a couple of days and is very rough. If you need detailed log data, use the logging of sensor values to the media. Note: Make sure no endpoint security services used in the network are not blocking the download of XML and CSV files. |
Reset smoke sensors
If analog sensors like VT560 / Smoke detector/ sensor detects smoke or fire, it will go into Alarm mode. Alarm mode can only be switched off manually using the Reset smoke detectors panel or using the onboard sensor Analog sensor power reset is found in the System tree >> Onboard.
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic