VT500 / Temperature sensor
Online up-to-date documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1834713171/VT500+Temperature+sensor
Product page: https://vutlan.com/digital-output/14-vt500-temperature-sensor.html
Function and purpose
The sensor is needed for the measurement of temperature indoors.
"VT500 / Temperature sensor" is an analog plug-and-play temperature sensor for indoor use only. Can be connected to any of the analog ports (A1...A8) of Vutlan monitoring systems.
The accuracy of the sensor is ± 0.15 °C at room temperature. The maximum distance from the monitoring unit (or sensor extension unit) is 100 meters.
The maximum amount of sensors and maximum length can be extended using the "VT408 / Sensor extension unit".
The sensor can not be used on its own. It must be used together with Vutlan monitoring systems.
Technical specifications
Package includes
Drawings
Connecting the sensor
The sensor uses a standard Vutlan analog RJS5 RJ11 sensor cable for connecting to the monitoring unit.
Analog sensor connection
Installation using a sticker and a bracket
Option 1.
There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.
Cut the round bump using a knife so that the bottom of the plastic enclosure will be flat.
Option 2.
a) Stick the mounting sensor to the surface using the sticker.
or
b) Stick a sensor to the surface using a screw.
Option 3.
Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.
Sensor configuration
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic
www.vutlan.com