VT-BAT Backup battery 6F22 9V
- Vladimir Tayzhev
Content
 |  |
|
Function and purpose
VT-BAT / Reservation battery 9V is an extension module that can be purchased separately.
Keep your Vutlan monitoring systems operational with the VT-BAT 6F22 9V Backup Battery while the main power source is disabled. Designed for emergency use during power failures, this non-rechargeable battery provides dependable backup to safeguard your critical infrastructure when needed most.
The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.
It is used for VT604t, VT825t, and VT855t.
Physical Description
The PCB has no LEDs.
Installation
# |
|
|
|---|---|---|
1 | a) Unscrew x2 countersink screws at the panel named “Battery extension slot” located at the back of the monitoring system case. b) take the panel out. | |
2 |
| Insert the battery inside VT-ACCU PCB unit. 6F22 9V DO NOT USE RECHARGEABLE BATTERY! Only use Non-rechargeable battery! You can use 9V battery enclosed in standard PP3 enclosure
|
3 |
| Push in the battery case with it’s legs into the PCB gaps. |
4 |
| Slide the battery case so that it locks into the PCB. |
5 |
| Screw the unit to the panel that we have unscrewed in step one using x2 screws M3. |
6 |
| a) Plug the assembly into the monitoring system slot named “Batttery extenion slot”. b) Screw the panel to the enclosure using x2 countersink screws that we have received in step 1. |
Package content
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic