KMS-30 / Access magnet sensor

Owned by Vladimir Tayzhev
Last updated: Mar 13, 2024
3 min read

Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/549847042/KMS-30+Access+magnet+sensor

Product page: https://vutlan.com/contacts/63-kms-30.html

Function and purpose

For installation inside of IT racks and cabinets, enclosures, doors, and windows. It is used to detect the opening of doors or windows, garage doors, and rack doors, in places where it is necessary to surveillance by means of opening the magnetic contact. It is also compatible with many alarms and other 3rd party brands. Detection is based on the separation of two magnetically interconnected parts, one which is located on the frame door/window and the other on the door/window. This simple sensor of the basic set alarm requires no power supply, it is powered directly from the main unit alarm, simply connect it to the dry contact inputs of the Vutlan monitoring system.

Technical specifications

KMS-30
KMS-30

Type of sensor

reed switch

Maximum distance from the unit

500 m

Body dimensions

29 x 18.8 x 6.9 mm

Recommended operating humidity

5 - 95%

Connection

lead

Contacts configuration

SPST-NO

IP rating

IP68

Operating temperature range (TT)

-10 - 50 °C

Components

Manufactured in E.U.

Max. distance

500 m.

HS Code

8531 10 300

Connection

  1. Connect the sensor's x2 cables to the 3.5mm power terminal connector as shown in the picture below. Cables may be swapped.

  2. Insert the terminal into the "Dry contact Input" of the Vutlan monitoring system.

Installation/mounting

1

  1. Mount the "Magnet" (which does not have wires) on the door or window using the sticker or two screws supplied in the package.

  2. Mount the "Sensing element" (which has two wires) on the door or window frame.

2

  1. Make sure to align the sensors to each other.

  2. Make sure to turn them to each other as displayed in the picture.

  3. The distance between the magnet and the sensing element should not exceed 8-10mm.

3

  1. When the door is closed, the contact is closed. By default, the sensor is in a normal state. The initial state of the sensor can be changed in the web interface.

4

  1. When the door is open, the contact is closed. By default, the sensor goes to an alarm state. The initial state of the sensor can be changed in the web interface.

Configuration


Packaging includes

 

Copyright:

Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic

www.vutlan.com