Factory settings recovery 2.2.0 - 2.2.5

Applicable for driver version: 2.2.0 - 2.2.5

Date of release: 18.04.2013

Firmware for factory settings recovery

This firmwares designed to reset settings the monitoring systems SC81xx/SC21xx/SC11xx Sky Control

Recovery the access password:

• sky25resetusers.sky - password recovery by default: guest;

For skycontrol-recovery-firmware.zip recovery pack:

• sky25firmware-factory-recovery.sky  - restore the system settings to factory:

  • network settings: ip: 192.168.0.193/24, gateway: 192.168.0.1

  • password: guest;

  • sensor settings are reset by default;

• sky25firmware-network-recovery.sky  - restore the network settings to factory:

  • ip: 192.168.0.193/24, gateway: 192.168.0.1

• sky25firmware-password-recovery.sky - restore the user password to factory: 

  • password: guest;

Applying firmware

• by web-interface: 

  • System menu -> Upload new firmware

• by usb-flash: 

  • rename the firmware file to sky25firmware.sky;

  • put this file to usb-flash drive;

  • connect usb-flash drive to front panel;

  • after reset system (all the green leds go out) remove the usb-flash drive;

Installation instructions can be found here: English

Open	Recovery the access password (SC series)

Open	Recovery pack (SC серия)

To allow us better support please leave your comments below or on our forum.