Factory settings recovery 2.3.0 -2.4.4 (deprecated)

Applicable for driver version: 2.3.0 - 2.4.4 and higher

Date of release: 18.04.2013

Firmware for factory settings recovery

This firmwares designed to reset settings the monitoring systems SC81xx/SC21xx/SC11xx Sky Control

Recovery the access password:

• sky25resetusers.sky - Login and password recovery by default: guest;

For recovery-tools.zip recovery pack:

• Service firmware recovery in the monitoring system.

  factory-recovery-sky25firmware.sky - restore factory settings of the system:
  * Network settings: ip: 192.168.0.193/24, gw: 192.168.0.1
  * Login: guest; Password: guest;
  * Sensor settings are reset to default;
  network-recovery-sky25firmware.sky - restore default network settings: ip: 192.168.0.193/24, gw: 192.168.0.1
  password-recovery-sky25firmware.sky - restore the default Name: guest; Password: guest;

  Installing firmware:
  * Via usb-flash: you must rename the firmware in 'sky25firmware.sky', 'sky25settings.sky' or 'sky25resetusers.sky', put this firmware on usb-flash drive, connect the usb-flash drive to plug on the front panel, after rebooting the system (all the lights go out) remove usb-flash drive;
  * Via the web interface: System menu -> Upload new firmware
  
  WARNING! Attention after the update, you must clear your browser cache.

Installation instructions can be found here: English. 

To allow us better support please leave your comments below or on our forum.