2.4.5 V
Version 2.4.5 b246 ( )
Date of release: 24.02.2015
This version is designed to update the firmware of VT81xx / VT8xx of Vutlan sro.
Updates:
A few SMS number possibilities were included and the test bug was killed!
VT410, VT405, VT406, and VT 420 current and voltage sensors form corrected. Attention! VT405, VT406, and VT410 sensors show 0-5V independently of measured value. (For example, measured value 0-75V of VT410 shows only 0-5V!)
Macros %8 for element identity in a group;
MicroSIM cards added;
Macros %8 for SNMP added;
Default values for Internal temperature and Voltage setup;
Floating menus
New users bug killed
CAN element bug killed
Sensor on a map bug killed
Backup your current system settings before update to this version firmware to be able restore settings for possible downgrade later.
Since the authorization system changed, after the update does not saved the current user information. Please, use default account: guest:guest
The appliance has the possibility to update or to restore software. You can update software via HTTP, FTP, or using a USB flash drive. Installation instructions can be found here: English.
HTTP upgrade (VT series) |
---|
USB upgrade (VT series) |
---|
Firmware Recovery Tool (VT series) |
---|
Settings Recovery Tools (VT series) |
---|
If the type of your master-module does not match the master module in the firmware, please, setup the correct type of master module by means of a special procedure /wiki/spaces/DEN/pages/9502783 or Программирование типа устройства
developer notes: linkchangeTo allow us better support please leave your comments below or on our forum.