2.2.4
Version 2.2.4 b324
Date of release: 27.02.2014
Bugs fixed:
- CAN driver;
- CAN-modules configuration;
- macros (%1) error in the notifications;
- synchronization error with the time zone of the browser for other than GMT0;
- last event time error after log reset;
form of notification by email (including email notifications creating error);
- increased time-out SNMP-agent;
- static IP address by Network settings in the DHCP error;
- error of count sendings over 65535 for element Ping;
- other minor fixes;
Other updates:
- new element type "Trigger" with control feature by SMS;
- sound alert for "System logs" panel update;
This version is designed to update the firmware of SC81xx / SC21xx / SC11xx of Sky Control.
Backup your current system settings before update to this version firmware to be able restore settings for possible downgrade later.
Logic schemes and sensor parameters are not saved when updating firmware from 2.0.x to 2.2.x. It is currently not possible to save logic schemes and sensor data when updating. Please write down your configurations or take screenshots.
The appliance has the possibility to update or to restore software. You can update software via HTTP, FTP or using USB flash drive. Installation instructions can be found here: English.
| HTTP upgrade (SC series) |
|---|
| USB upgrade (SC series) |
|---|
| Recovery Tool (SC series) |
|---|
To allow us better support please leave your comments below or on our forum.