VT510 / Humidity sensor (v2) (legacy)

Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1841463297/VT510+Humidity+sensor+v2

Product page: https://vutlan.com/analog-sensors/16-vt510-humidity.html

Function and purpose

The sensor is needed for the measurement of relative humidity 0-95% indoors with a relative accuracy of 3%RH.

Technical specifications


Product dimensions

(Length, Width, Height) 60×18×18 mm

Power Consumption

60 mW

Operating temperature

-40° C to +100° C

Operating humidity

0 to 95 %

Storage temperature

-40° C to +100° C

Storage humidity

0 to 95 %

Mounting possibilities

Desktop and Wall mount

Max. distance from the unit

50 m

Manufactured in (country)

Manufactured in Slovak Republic, E.U.

HS Code

9025 11 800

Special Features

Accuracy 3% RH

Inputs terminals

RJ-12 / RJ-11


GPSD, ROHS, CE, Quality certificate

Package includes


Connecting vibration sensor

The sensor uses a standard Vutlan analog RJS5 RJ11 sensor cable for connecting to the monitoring unit.

Analog sensor connection

Installation using a sticker and a bracket

Option 1.

There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted together with the on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.

Cut the round bump using a knife so that the bottom of the plastic enclosure will be flat.

Option 2.

a) Stick the mounting sensor to the surface using the sticker.


b) Stick a sensor to the surface using a screw.

Option 3.

Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.

Connecting the sensor


Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic