Page Comparison

Version: 4.2.01-b201b112

Date of release: 1615.1102.20232024

List of latest drivers for the A40i processor by version for VT960i & VT960ii units.

Updates:

• Supervisor for logging of user sessions;

• The possibility of drawing on the map;

• Support SNMP GET v3;

• Support JSON HTTP Request;

• Partial support JSON API;

• Update DynDNS service scripts;

• Generating self-signed HTTPS certificates directly on the unit;

• The ability to choose a GSM operator manually;

• LTE gateway mode (internet access for the internal network through the unit);

• Incoming SMS forwarding and SMS commands to emails and phones. Check the SMS bot settings if you use them;

• Modem state elements in "System tree": signal strength, GSM state, LTE state;

• The new "resetusers.vut" tool does not affect other user entries;

• New multi-level map, up to 5 levels. Warning! The old map data will be lost. The map needs to be adjusted again;

• Duplicator program update (please reinstall the certificate if necessary);

• Selecting a TLS version;

• Freezing icons on the map;

• USSD answers in a log;

• RTSP IP camera support;

• A severity level for SNMP Trap notification updated MIB file;

• The page of Dry contacts (if present) can be chosen as a starting page;

• Daily Mail Log can be sent at the selected time;

• The sampling rate for logging sensors expanded to 3 hours;

• The default thresholds for temperature and humidity sensors have been changed;

• Log-on media extended to 3 years;

• New ON / OFF and OFF / ON icons for user-defined type of Dry inputs;

• Up to 2 USB web cameras support (in separate ports only);

• Up to 960x720 USB web camera resolution;

• NTP server function;

• SD card SDXC support up to 64GB;

• SD card formatting function (FAT32);

• LTE authentication support for PAP, and CHAP;

• LTE connection log;

• New Nginx server version 1.20.2;

• Dashboard templates;

• Support Modbus TCP Wake-On-LAN;

• Traceroute tool;

• Backup of system settings on USB flash drive;

• WebUI update - hide LTE tab if it not supported, more icons for dry contacts, formula type for analog sensors;

• Duplicator program;

• SNMP settings. Check the SNMP settings if you used them, they are disabled by default.

• MIB file update;

• Reading a MAC address using SNMP;

• Sending SMS using SNMP;

• Custom static route to gateway or host;

• Firmware upload process;

• No modem power off in case of long network loss;

• Improved support for USSD message format;

• Modbus TCP reading and writing elements;

• Modbus RTU writing element;

• IMEI code of the modem is displayed;

• Dashboard trigger button;

• Up to 50 unique sensors on the dashboard;

• Copying logical schemes;

• Copying "Math" virtual element;

• Dialing duration;

• Strict email subject;

• Time format 12/24;

• Add line break type for "Web SMS" and "HTTP request";

• Media refactoring, resistance for removal without unmounting;

• Improved LTE, static IP address support;

• Improved CAN bus work;

• Up to 30 sensors for detailed logging;

• Up to 10 min period of detailed sensors polling;

• Dashboard - add the minimum and maximum value of the output range for the gauge;

• Email subject supports macro extension;

• Start page selectable;

• CAN bus statistic info;

• Dashboards interface;

• Сameras refactoring;

• Proxying for IP cameras (up to 4 cameras supported);

• AV camera support, video up to 30 minutes long;

• HDD support for log and video;

• User contacts data added;

• SMTP outgoing server default settings added;

• Copy function for notifications, and SNMP GET elements added;

• GPS location support for LTE modems;

• Time synchronization by GPS support;

• Send log files to the FTP server added;

• Notification "HTTP request" added;

• Virtual elements "SNMP Get" refactoring;

• Logic schemes extended - reboot the system;

• Logic schemes extended - actions at the startup system.

Bugs fixed:

• Rounding for the “Expression” formula for calculating the value for Modbus sensors;

• LTE connection stuck;

• CAN humidity sensor limit to 100%;

• Timer monthly mode;

• DynDNS “could not send request“ error;

• The old backup file is not loaded;

• Extra comma in the email list;

• The duplicator not working;

• RADIUS authentication failed after HTTP update;

• Reset smoke sensors in the web interface;

• Sensor data updating on the map;

• SMS Gate user password with symbol $;

• Web interface dry inputs icons behavior;

• Some minor bugs in DHCP network mode;

• Order of Dry contacts inputs for VTX16 extension board;

• USB camera error "Video streamer restart";

• Correct display of the username of the RFID card for access control;

• Loss of dashboard sensors;

• SD card missing after ejection or formatting;

• Log archive error;

• SMS messaging encoding;

• SNMP v3 settings saving;

• LTE settings saving;

• SNMP GET analog threshold values;

• SNMP GET discrete sensor;

• IP camera URL;

• WebUI sound for alerts;

• CAN configuration stuck;

• OR logic scheme behavior;

• Dialing task test;

• Macro % behavior in messages;

• Hanging of the Modbus ТСР sensor;

• USB upgrade and settings restore;

• Test mail sending;

• Reset settings to default values;

• Monthly and weekly timer;

• The available number of virtual sensors increased;

• More memory is allocated for sensors.
  

File for HTTP upgrade:

View file name vutlan-vt960i-4.2.01-b201b112.vut

File for Restore of appliance:

	vutlan-VT960i-4.2.01-b201b112-factory.img

File for USB upgrade:

View file name firmware.vut

...