Version: 3.8.3-b730
Date of release: 28.10.2021
List of latest drivers for the A20 processor by version for VT900 & VT960 units.
Updates:
- SNMP settings. Check the SNMP settings if you used them, they are disabled by default.
- MIB file update;
- Reading a MAC address using SNMP;
- Sending SMS using SNMP;
- Custom static route to gateway or host;
- No modem power off in case of long network loss;
- Improved support for USSD message format;
- Modbus TCP reading and writing elements;
- Modbus RTU writing element;
- IMEI code of the modem is displayed;
- Dashboard trigger button;
- Up to 50 unique sensors on dashboard;
- Copying logical schemes;
- Copying "Math" virtual element;
- Dialing duration;
- Strict email subject;
- Time format 12/24;
- Add line break type for "Web SMS" and "HTTP request";
- Improved LTE, static IP address support;
- Improved CAN bus work;
- Up to 30 sensors for detailed logging;
- Up to 10 min period of detailed sensors polling;
- Dashboard - add minimum and maximum value of the output range for the gauge;
- Email subject supports macro extension;
- Start page selectable;
- CAN bus statistic info;
- Dashboards interface;
- Сameras refactoring;
- Proxying for IP-cameras (up to 4 cameras supported);
- AV camera support, video up to 30 minutes long;
- HDD support for log and video;
- Users contacts data added;
- SMTP outgoing server default settings added;
- Copy function for notifications, and SNMP GET elements added;
- GPS location support for LTE modems;
- Time synchronization by GPS support;
- Send log files to FTP server added;
- Notification "HTTP request" added;
- Virtual elements "SNMP Get" refactoring;
- Logic schemes extended - reboot the system;
- Logic schemes extended - actions at the startup system.
Bugs fixed:
- SNMP GET discrete sensor;
- IP camera URL;
- WebUI sound for alerts;
- OR logic scheme behavior;
- Dialing task test;
- Macro % behavior in messages;
- Hanging of the Modbus ТСР sensor;
- Initialization order of extension boards VTX16 and VTX40, check it after upgrade;
- Adding elements to the dashboard;
- Device timezone for times with minutes;
- USB upgrade and settings restore;
- Test mail sending;
- Reset settings to default values;
- Monthly and weekly timer;
- The available number of virtual sensors increased;
- More memory allocated for sensors.
The firmware is not backward compatible. If you need to flash the old version, then use Restore of appliance.
File for HTTP upgrade :
File for Restore of appliance
File for USB upgrade :
Settings recovery tools:
- settings.vut - network address changes to 192.168.0.101;
- resetusers.vut - reset to one user: Login: guest / Password: guest
Read more at: USB upgrade or restore of default settings