...
Release date: May 11th, 2021
End-of-Life date: November 03rd, 2023
End-of-Support date: November 03rd, 2025
...
Function and purpose
The unit is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can use up to 1000 different elements - notifications, triggers, timers, logic schemes, sensors, dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels. Has a slot for an LTE modem. Has the possibility to install an internal 2.5-inch HDD inside the case. This is the fastest and most powerful Vutlan monitoring unit.
...
11-12. USB ports are needed for USB camera recording, USB Flash for system logs, and system restoration. Read instructions in "Connecting USB camera", "USB camera settings. How to save a video", "Saving system logs on USB flash drive", and "USB upgrade or restore of default settings".
...
13. "DRY CONTACT INPUTS 1...32" - Digital inputs (Type IN). Read the instructions at "Connecting dry contacts", and "Dry contacts settings".
14. "ISOLATED DRY CONTACTS OUTPUTS 1...8" - Digital outputs 24VDC / 15mA (type OUT). Read the instructions at "Connecting dry contacts", and "Dry contacts settings".
15. VT960i has only x1 power inlet. VT960ii has x2 power inlets, providing a redundant power supply for A&B power distribution.
...
16. AV camera input, output, and a power supply. Read instructions at "Connecting hard disk drive", "AV camera", and "SATA Hard Disk Drive".
16a. "AV OUT" - Audio/video output. You can connect it to a monitor or other external device.
16b. "AV IN" - Audio/video input. Video/audio can be recorded if an HDD is installed.
16c. "DC OUTPUT 12V 0.25A Camera PWR" - 12V 0.25A output electronic relay terminal.
...
18. "MODBUS" - port for connecting Modbus RTU / RS-485 sensors and devices. Read instructions at "Connecting Modbus RTU sensors to VT336 & VT336PoE", and "Configuring Modbus devices".
18. "1-WIRE READER" - For connecting RFID reader or 1-Wire sensors. A serial communication protocol that uses a single data line plus ground reference between master and 1-Wire slave devices. Read instructions at "Connecting 1-Wire devices", "Access control", and "Setting up 1-Wire".
20. "Relays 1, Relay 2" - NC / NO power relay terminals. Read instructions at "Connecting NC/NO relays", "A relay switching (NC NO)", and "Relays (Outlets) (SNMP)".
...
Technical details
| Include Page | ||||
|---|---|---|---|---|
|
...
You can install a 2.5" HDD inside the unit for recording video and logs. Read the instruction at: "Connecting hard disk drive", "SATA Hard Disk Drive", and "AV camera". The HDD is not sold together with the unit by Vutlan. Please purchase it and install it on your own.
...
| Include Page | ||||
|---|---|---|---|---|
|
Device configuration
Read the following articles for initial configuration:
...