Function and purpose
Product page: https://www.vutlan.com/accessories/40-vt105-strobe.html
Documentation link: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1834680385/VT103+Alarm+beacon
Needed for light and sound alarms. Has 1.5 m in length. Connects to 12V DC, 0.25A electronic relay of Vutlan monitoring systems.
Package includes
Package includes:
Package content | Description | Quantity | |
|---|---|---|---|
1 |  | Alarm beacon with 1.5m cable | 1 pc |
2 |  | 4J-S sticky clamps | 2 pcs |
3 |  | 2.5mm Dowels | 2 pcs |
4 |  | Screws for dowels, B2.9*20 | 2 pcs |
Drawing
Installation drawing
Connecting 12V devices to Vutlan monitoring systems
Introduction
All Vutlan monitoring systems and switched PDUs can connect up to two alarm beacons, for example, a siren and/or strobe, and other low-current devices, for example, a dry contact output module VT11, to E1, E2 - two outputs of electronic relays.
Connection
To connect the alarm beacon to the 12V output, you need to connect the device with a cable to the terminal according to the polarity. By appropriate logic or manually in the device interface, you can turn on or off and/or give a pulse to the siren, strobe, or a signal on a dry contact output. The maximum current consumption is limited by 250 mA.
Check the voltage supply in the test mode. Go to the Main Menu -> System Structure -> Alarm in the system interface. In the window that appears, click "Pulse". The stroboscope lights up, and the siren wails. To configure alarms, you need to configure the logic.
.jpg?version=1&modificationDate=1523611673801&cacheVersion=1&api=v2&width=259&height=377)
Do not connect the loads to the outputs while the monitoring system is on.
.jpg?version=1&modificationDate=1589873218275&cacheVersion=1&api=v2&width=760&height=366)
Vutlan accessories for 12V DC outputs
12V DC relay outputs configuration
The page linked: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/601030668
12V relay configuration (alarm beacon or strobe light)
a) Login to the web interface of the monitoring system
b) To configure the relay: go to System tree >> Power 12V 0.25A >> Choose relay
c) By default Power-1 and Power-2. Rename it, set the initial state, and set Pulse duration time in seconds to a specific period.
Additionally: 12V relay configuration
Cable pinouts
Strobe light uses a standard two-wire cable for connecting to the monitoring unit.
Technical specifications
VT105 | |
|---|---|
| Dimensions | Size 70 x 36 x 56 mm, cable 3m |
| Weight | 150g |
| Cable length | 3m |
| Output | Light and sound |
| Rated voltage | 12V DC, 1A |
| Power consumption | 250mA |
| Sound pressure | 108 dB |
| Tone frequency | 3.8 kHz |
| Flash frequency | 2.5Hz red 150/min |
| Mounting | Wall mount |
| HS code | 8531 10 300 |
| Case, color | ABS plastic, red, white |
| IP rating standard | IP54 |
| Operating temperature | Temperature: Min. -50 °C - Max.105 °C |
| Operating humidity | Humidity : Min. 5% - Max. 95% (Non-Condensing) |
| Components | Manufactured in E.U. |
Copyright of:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic