To update the software via USB, first upload appropriate driver from our "drivers" section.
Attention! Use only one file when upgade! Second upgrade is possible only after system rebooted.
To upgrade to version 2.7.1 and higher:
Download file named firmware.vut and upgrade.
You can download and use zip file named tools.zip with files:
factory-settings.vut - factory settings reset;
network-settings.vut - network address changes to 192.168.0.193;
resetusers.vut - reset to one user: Login: guest / Password: guest
Insert USB flash drive into the "HS" USB input and wait while the contents of drive will be analyzed by the device.
The updating process is indicated by LEDs on the front panel of the device: file installation is indicated by switching ERR, the end of the installation process is indicated by a short-term increase in switching frequency ACT. Then all the lights switches off - the system is rebooted. Completion is indicated by switching reboot ACT.
After the reboot (all LEDs are turned off) after 30-60 seconds, check the system operation.