Page Comparison

...

For installation inside of IT racks and cabinets, enclosures, doors, and windows. It is used to detect the opening of doors or windows, garage doors, and rack doors, ie . in places , where it is necessary to surveillance by means of opening the magnetic contact. It is also compatible with many alarms and other 3rd party brands. Detection is based on the separation of two magnetically interconnected parts, one which is located on the frame door/window and the other on the door/window. This simple sensor of the basic set alarm requires no power supply, it is powered directly from the main unit alarm, simply connect it to the dry contact inputs of the Vutlan monitoring system.

...

1. Connect the sensor's x2 cables to the 3.5mm power terminal connector as shown in the picture below. Cables may be swapped.

2. Insert the terminal into the "Dry contact Input" of the Vutlan monitoring system.

3. 

Installation/mounting

1	Image RemovedImage Added	Mount the "Magnet" (which does not have wires) on the door or window using the sticker or two screws supplied in the package. Mount the "Sensing element" (which has two wires) on the door or window frame.
2	Image RemovedImage Added	Make sure to align the sensors to each other. Make sure to turn them to each other as displayed in the picture. The distance between the magnet and the sensing element should not exceed 8-10mm.
3	Image RemovedImage Added	When the door is closed, the contact is closed. By default, the sensor is in a normal state. The initial state of the sensor can be changed in the web interface.
4	Image RemovedImage Added	When the door is open, the contact is closed. By default, the sensor goes to an alarm state. The initial state of the sensor can be changed in the web interface.

...