...
Since v. 2.7.1 is available selective backup settings to a file.
Selective backup configuration file can be used for mass deployment of monitoring units on a facilities when it is expected to use multiple units with identical settings. One monitoring system is set up first, after which the settings of this system necessary to backup. Further backup settings are restored on other systems, and different parameters are set manually.
...
To configure the backup settings on the ftp server on a schedule, go to Preferences-> FTP Backup
Description:
| # | Field | Definition |
|---|---|---|
| 1 | FTP Server | FTP server address |
| 2 | FTP port | FTP server port |
| 3 | Username | FTP server user |
| 4 | Password | The user's password on the FTP server |
| 5 | Target directory | Directory to save the settings on the FTP server (would be there!) |
| 6 | Execution interval | Backup settings range. Possible values:
|
| 7 | Day of backup | Day of the week or of month |
| 8 | Time of backup | Backup time |
...
This possibility exists in all versions. Factory data reset carried out using special firmware that can be downloaded from the drivers as the Settings Recovery Tools.
...
Reset firmware installed in the same way like usual software upgrade.
...
Starting with version 2.5.0 reset is also possible via the web interface. Go to tab "System menu" ->About and push tab "OK" for "Reset settings to default values"
Possible options:
...
3) using a switch "Recovery" on the rear panel.
From version 2version 2.5.1 and 1 and higher added the ability to return factory settings using a switch NORMAL / RECOVERY .
To return to factory settings, set the switch NORMAL switch NORMAL / RECOVERY in RECOVERY in "RECOVERY" position for time of 5 to 30 seconds.
In 5 s after turning this switch to "RECOVERY" position, "ERROR" LED on the front panel lights Up. Now return the switch NORMAL switch NORMAL / RECOVERY in RECOVERY in "NORMAL" position. System restored the factory settings and then reboot.
...