Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Current »

Version 2.4.5 b246 (  )

Date of release: 24.02.2015

This version is designed to update the firmware of VT81xx / VT8xx  of Vutlan sro.

Updates:

  • A few SMS number possibility included and test bug killed!
  • VT410, VT405, VT406 and VT 420 current and voltage sensors form corrected. Attention! VT405, VT406, VT410 sensors shows 0-5V independently of measured value. (For example measured value 0-75V of VT410 shows only 0-5V!)
  • Macros %8 for element identity in a group;
  • MicroSIM cards added;
  • Macros %8 for SNMP added;
  • Default values for Internal temperature and Voltage set up;
  • Floating menus
  • New users bug killed
  • CAN element bug killed
  • Sensor on a map bug killed

Backup your current system settings before update to this version firmware to be able restore settings for possible downgrade later.

Since the authorization system changed, after the update does not saved the current user information. Please, use default account: guest:guest


The appliance has the possibility to update or to restore software. You can update software via HTTP, FTP or using USB flash drive. Installation instructions can be found here: English.


HTTP upgrade (VT series)

firmware-2.4.5-b246.vut

firmware-2.4.5-b246.md5

USB upgrade (VT series)

firmware.vut

firmware.md5

Firmware Recovery Tool (VT series)

updater-2.4.5.zip

updater-2.4.5.zip.md5


Settings Recovery  Tools (VT series)

tools-2.4.5-b246

tools-2.4.5-b246.md5

 

 If the type of your master-module does not match the master module in the firmware, please, setup the correct type of master module by means of a special procedure /wiki/spaces/DEN/pages/9502783 or /wiki/spaces/DocRU/pages/9502781


developer notes: linkchangeTo allow us better support please leave your comments below or on our forum.


  • No labels