You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
12V relay configuration (for example, alarm beacon, strobe light, lock)
a) Login to the web interface of the monitoring system
b) To configure the relay: go to System tree >> Power 12V 0.25A >> Choose relay
c) By default Power-1 and Power-2. Rename it, set the initial state, and set Pulse duration time in seconds to a specific time period.
Examples
Example configuration article can be read at: Access control
Hardware configuration of 12V devices: Connecting 12V devices to 12V outputs
12V Vutlan devices
VT103 / Alarm beacon
VT105 / Strobe light
VT11 / Relay output