Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/600145921/VT105+Strobe+light

Product page: https://vutlan.com/12v-dc-devices/40-vt105-strobe.html

Function and purpose

VT105 LED strobe light is a 12V DC device for light flashing in case of warnings and alarms.

Connects to 12V DC, 0.25A electronic relay output of Vutlan monitoring systems. Can be configured to sound/light an alarm if an alarm event has been triggered.

Can be used with 3rd party controllers.

Technical specifications

Function and purpose

Description

Used for

VT105 is a LED Security Alarm powered by 12V relay outputs.

Flashing frequency

90/Min

Communication

Description

Input

2-wire cable (red/black)

Output

LED source

Environmental

Description

Operating temperature

Temperature: Min. -50 °C - Max.105 °C

Operating humidity

Humidity : Min. 5% - Max. 95% (Non-Condensing)

IP rating standard

IP54

Power

Description

Voltage

12V DC

Rated current

120mA

Power consumption

1 Watt

Mechanical

Description

Dimensions

⌀73.5mm, Height 45.5mm, cable length 3m

Weight

110g

Mounting

Wall or ceiling mounting

Casing

Color: red and white; Material: plastic

Genral

Description

Components

Manufactured in E.U.

HS Code

8531 10 300

GTIN:

8588009886600

Warranty:

Package includes

Package includes:

Package content

Description

Quantity

1

  • x1 Flashing LED device with a cable,

  • x2 back plastic panels

2

Round sticker with holes

1 pc

3

Bolts М3 8mm

2 pcs

4

2.5mm Dowels


2 pcs

5

Screws for dowels, B2.9*20

2 pcs

Connecting a strobe light using only a sticker

A strobe light can be connected to 12V 0.25A outputs of the Vutlan monitoring system. The diagram below explains how to connect "VT105 / Strobe light" to a monitoring system.

Step 1.

Remove the central part of the sticker.

Step 2.

a) Remove the protective paper from one side of the sticker. Apply the sticker to the "VT105 / Stobe light" backside.

b) Remove the protective paper from the second side of the sticker. Stick the Strobe light together with the sticker to the surface. Make sure the cable is laid out neatly using the stickers holes.


Strobe light uses a standard two-wire cable for connecting to the monitoring unit.


Step 3.

Connect the cables to 12V 0.25A outputs of the monitoring unit using a Terminal. The terminal must have a 3.81mm step.

a) Connect the black cable to a "-". Indicated by the "earth" sign.

b) Connect the red cable to a "+". Indicated by the "E1" or "E2" label.

Connecting 12V devices to 12V outputs

Page linked https://vutlan.atlassian.net/wiki/spaces/DEN/pages/71181064/Connecting+12V+devices+to+12V+outputs

Connecting a strobe light using dowels

Step 1.

Remove hole parts of the sticker.


Step 2.

Screw the back panel to the backside of the strobe light using 2 M3 screws.


Step 3.

a) Drill two holes for the dowels.

b) Drill a middle hole in the surface if You plan to wire cables through the surface.


Step 4.

a) Insert the dowels into the wall.

b) Insert the adhesive sticker between the wall and the back panel.

c) Screw two M3 screws through the back panel and sticker into the dowels.


Step 5.

Once one back panel is screwed to the wall and the other is screwed to the strobe light, connect both back panels and rotate the strobe light until it is firmly connected.


Step 6.

Connect the wires to the monitoring unit.

12V relay configuration (alarm beacon or strobe light)

Page linked https://vutlan.atlassian.net/wiki/spaces/DEN/pages/601030668/12V+relay+configuration

Package includes

Copyright:

Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic

www.vutlan.com

  • No labels