VT11 / Relay output

Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/583237633/VT11+Relay+output

Product page: https://vutlan.com/digital-output/72-vt11-relay-contact-5a.html

Function and purpose

Relay switchable contact. Can be used together with equipment, for example for switching it ON/OFF. For controlling devices that have dry contact input or controlling their power source. Can manage 5A power for magnetic locks, bolt locks, solenoid electromagnets, sirens, light sources, heaters, air conditioners, etc.

Can be connected to any Vutlan unit with 12V relay outputs.

Technical specifications

Function & purpose	Description
Used for	Can be connected to Vutlan monitoring system with 12V DC outputs. Used as a relay switchable contact.

Communication	Description
Input	wire terminal, pitch 3.81mm, 2P
Outputs	wire terminal, pitch 5.0mm, 2P

Environmental	Description
Operating temperature	Temperature: Min. -50 °C - Max.105 °C
Operating humidity	Humidity : Min. 5% - Max. 95% (Non-Condensing)

Power	Decription
Max switching current	5A
Max. switching voltage	250VAC / 30VDC
Max. switching power	1250VA / 150W
Min. contact load	No gold plated: 5VDC 10mA
Power consumption	12 mW
Max. distance m	200 m

Mecanical / Packaging	Description
Dimensions	60×18×18 mm
Weight	60 g
Mounting	The mounting bracket, sticker, and screws are included.

General	Description
Manufactured in	Manufactured in E.U., Slovak republic, Vutlan s.r.o.
HS Code	9025 11 800
GTIN	8588009886525
Warranty	90 days

LED indication

The sensor has a red LED indicator that sticks from the top cover

	Normal	Reverse
contact is closed	Red	-
contact is open	-	Red

Drawings

Connecting switchable contact

Switchable contact can only be connected to 12V 0.25A outputs of the Vutlan monitoring system. The diagram below explains how to connect two VT11 switchable contacts to the monitoring system.

Usage examples with installation diagram

Example 1. Using "VT11 / dry contact output" to control a device with dry contact input.

Example 2. Control siren, light source, heater.

Example 3. Control magnetic lock, electric motor, solenoid electromagnet

Cable pinouts

Switchable contact uses a standard two-wire cable for connecting to the monitoring unit.

Packaging includes

Supply includes

#	Description	Quantity
1	VT11 / Dry Contact Output Switchable contact	1 pc
2	Two wire cable (2 m)	1 pc
3	Screw: B3.5, Length 16mm	1 pcs
4	Terminal plug 5.0 mm, 2P	1 pc
5	Terminal plug 3.81 mm, 2P	1 pc
6	Sticker	1 pc

Introduction

All Vutlan monitoring systems and switched PDUs can connect up to two alarm beacons, for example, a siren and/or strobe, and other low-current devices, for example, a dry contact output module VT11, to E1, E2 - two outputs of electronic relays.

Connection

To connect the alarm beacon to the 12V output, you need to connect the device with a cable to the terminal according to the polarity. By appropriate logic or manually in the device interface, you can turn on or off and/or give a pulse to the siren, strobe, or a signal on a dry contact output. The maximum current consumption is limited by 250 mA.

Check the voltage supply in the test mode. Go to the Main Menu -> System Structure -> Alarm in the system interface. In the window that appears, click "Pulse". The stroboscope lights up, and the siren wails. To configure alarms, you need to configure the logic.

Do not connect the loads to the outputs while the monitoring system is on.

Vutlan accessories for 12V DC outputs

12V DC relay outputs configuration

The page linked: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/601030668

Configuring 12V relays

Page linked https://vutlan.atlassian.net/wiki/spaces/DEN/pages/601030668/12V+0.25A+relay+configuration

Copyright:

Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic

www.vutlan.com