...
To upgrade to version 2.7.1 and higher:
Download file named Скачайте файл драйвера "firmware.vut and upgrade. " для USB upgrade. Скопируйте файл на USB flash drive. Не изменяйте имени "firmware.vut", т.к. система для обновления драйвера ищет файл именно с таким именем.
You can download and use zip file named tools.zip with files:
- factory-settings.vut - factory settings reset;
- network-settings.vut - network address changes to 192.168.0.193 (192.168.0.101 for VT900 series);
- resetusers.vut - reset to one user: Login: guest / Password: guest
Эти файлы обеспечивают некоторые сервисные функции, если по каким то причинам вэб-интерфейс системы стал недоступен. Прочтите readme.txt в архиве, чтобы узнать подробности.
Insert USB flash drive into the "HS" USB input (USB0 or USB1 input for VT900 series) and wait while the contents of drive will be analyzed by the device.
| Warning |
|---|
On VT900 series system use only one USB flash drive at once. |
The updating process is indicated by LEDs on the front panel of the device: file installation is indicated by switching ERR, the end of the installation process is indicated by a short-term increase in switching frequency ACTflashing ERR led. Then all the lights switches off - the system is rebooted. Completion is indicated by switching reboot ACTAt this time you must remove USB flash drive.
After the reboot (all LEDs are turned off) after 30-60 seconds, check the system operation.