...
Widget | Description |
|---|---|
Right now | Shows the number of elements in the following states at the moment: very low, low, normal, warning, alarm; |
State of elements | The number of elements in the following states: very low, low, normal, attention, alarm; |
Current log | Shows 5 last Syslog events; |
About system | All about the system, the operating time, the browser; |
Time | Device time, local time. |
Mobile Interface
Vutlan web Interface is optimized for mobile and tablet devices. It can be viewed and controlled from any mobile browser.
...
Top toolbar
The top toolbar includes:
...
Main menu panel | Description | |
|---|---|---|
Dashboard | Configurable dashboard panel for displaying different sensor data. | |
Overall stats | Shows general statistics. | |
System tree | Shows all sensors and devices in a system tree (the tree is set up automatically by the system according to sensor groups). | |
Dry outputs panel | For configuring and controlling dry contact outputs. | |
Dry contacts panel | For controlling and configuring dry contact inputs. | |
Event log | Shows the system log. | |
Logic schemes | For setting up automatic actions on events happening in the system. | |
Cameras | Shows all cameras connected to the system. | |
Map | Designed for visual placement of elements on the plan/map. | |
Users | For managing user accounts and permissions. | |
CAN configuration | For CAN bus digital sensors and extension devices configuration. | |
Graphs | For comparative analysis of the history of sensor readings. | |
Outlets | Load management panel. | |
Reset smoke detectors | For resetting the alarm for all smoke sensors. | |
Access control | For managing access keys, and readers; (this menu appears if the RFID reader is connected); | |
Preferences | Web GUI | Language, Time convention, Data reload interval, Temperature measuring scale, Start page, and others. |
Network | Network options. | |
Time | Manual or automatic time synchronization options. | |
Logging | Save the log to SD card, USB Flash drive, HDD, FTP log, Mail log, Syslog, and individual sensor data. | |
DynDNS | Enable DynDNS | |
SNMP | Enable SNMP | |
RADIUS | Enable RADIUS | |
FTP backup | Configure FTP backup | |
VPN client | Enable VPN client | |
Modbus RTU | Enable Modbus RTU. See Comparison chart: Master modules to check if your module supports Modbus RTU. | |
GPS | Requires VT740 LTE modem | |
SMTP | Needed for E-mail notifications. | |
Routing | For traffic that should not pass through the default gateway | |
System menu | About | Firmware version, Web GUI version, operating system, browser, reboot the system. |
Firmware | For updating the KERNEL and Web Interface of the unit. | |
Export | Export sensor data, export log, and system settings; | |
Support | Quick support links |
...