Contents
Introduction
Control of the device and the monitoring of the elements is made through the web interface.
The first window that you will open will be the “Overall stats” panel. The panel shows current general statistics of the system and its elements such as several elements, their status, current log, time, and general system information.
Widget | Description |
|---|---|
Right now | Shows the number of elements in the following states at the moment: very low, low, normal, warning, alarm; |
State of elements | The number of elements in the following states: very low, low, normal, attention, alarm; |
Current log | Shows 5 last Syslog events; |
About system | All about the system, the operating time, the browser; |
Time | Device time, local time. |
Top toolbar
The top toolbar includes:
Option | Picture | Description |
|---|---|---|
Main menu |  | Hide or Show main menu |
Pen |  | First-time wizard for configuring language, time, network, SNMP, and user permissions. |
Add element |  | Add a new element to the panel. This option appears in several panels such as “System tree”, and “Dry contact inputs”. |
User name |  | Displays the current user name. |
Save settings to flash |  | Save settings to flash (If this button is not pressed, all new settings will be lost if the system is restarted). Make sure you save settings to Flash after you have applied new configurations. |
Logout |  | Log out from the web Interface session. |
Main menu
2. The "Left menu panel" is opened by pressing 
a button at the top bar. It includes:
Main menu panel | Description | |
|---|---|---|
Dashboard | Configurable dashboard panel for displaying different sensor data. | |
Overall stats | Shows general statistics. | |
System tree | Shows all sensors and devices in a system tree (the tree is set up automatically by the system according to sensor groups). | |
Dry outputs panel | For configuring and controlling dry contact outputs. | |
Dry contacts panel | For controlling and configuring dry contact inputs. | |
Event log | Shows the system log. | |
Logic schemes | For setting up automatic actions on events happening in the system. | |
Cameras | Shows all cameras connected to the system. | |
Map | Designed for visual placement of elements on the plan/map. | |
Users | For managing user accounts and permissions. | |
CAN configuration | For CAN bus digital sensors and extension devices configuration. | |
Graphs | For comparative analysis of the history of sensor readings. | |
Outlets | Load management panel. | |
Reset smoke detectors | For resetting the alarm for all smoke sensors. | |
Access control | For managing access keys, and readers; (this menu appears if the RFID reader is connected); | |
Preferences | Web GUI | Language, Time convention, Data reload interval, Temperature measuring scale, Start page, and others. |
Network | Network options. | |
Time | Manual or automatic time synchronization options. | |
Logging | Save the log to SD card, USB Flash drive, HDD, FTP log, Mail log, Syslog, and individual sensor data. | |
DynDNS | Enable DynDNS | |
SNMP | Enable SNMP | |
RADIUS | Enable RADIUS | |
FTP backup | Configure FTP backup | |
VPN client | Enable VPN client | |
Modbus RTU | Enable Modbus RTU. See Comparison chart: Master modules to check if your module supports Modbus RTU. | |
GPS | Requires VT740 LTE modem | |
SMTP | Needed for E-mail notifications. | |
Routing | For traffic that should not pass through the default gateway | |
System menu | About | Firmware version, Web GUI version, operating system, browser, reboot the system. |
Firmware | For updating the KERNEL and Web Interface of the unit. | |
Export | Export sensor data, export log, and system settings; | |
Support | Quick support links |