...
Installation inside a rack or cabinet using a bracket
Mounting bracket
The mounting bracket is supplied with each "VT550 / Wind velocity meter". Use a wire cutter and pliers to cut and bend the bracket to Your needs.
...
Installation
| Info |
|---|
The sensor measures the speed of the wind. If you install it too far away from the the air-conditioner, there will be no wind velocity or very little. It is best to install the sensor as close as possible to the origin of the wind. The sensor should work in the stream and the correct installation distance should be obtained by trial and error. |
...
RJ9 4p4c to 3-pin JST cable pinouts:
...
Technical specifications
VT550 / Wind velocity meter | |
|---|---|
Dimensions | 600×18x18 mm |
Weight | 106 g |
Inputs | RJ9 (4p4c) |
Outputs | RJ11 / RJ12 (6p4c) |
Operating temperature | Min. -10° C, Max.80° C |
Operating humidity | Min. 5% - Max. 95% (Non-Condensing) |
Mounting | Mounting bracket included for installation inside IT racks and cabinets |
Power consumption | 60mW |
Max. distance from the monitoring unit | 50 m |
HS Code | 9026 80 200 |
Components | Manufactured in E.U. |
Special features | Response time 0.1 sec. |
Other | The sensor is sold with preconfigured sensitivity. |
Drawings
...
...
|
|
Analog sensor connection
| Include Page | ||||
|---|---|---|---|---|
|
...