VT-BAT Backup battery 6F22 9V

Content

Function and purpose

VT-BAT / Reservation battery 9V is an extension module that can be purchased separately.

Keep your Vutlan monitoring systems operational with the VT-BAT 6F22 9V Backup Battery while the main power source is disabled. Designed for emergency use during power failures, this non-rechargeable battery provides dependable backup to safeguard your critical infrastructure when needed most.

The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.

It is used for VT604t, VT825t, and VT855t.

You can use 9V battery enclosed in standard PP3 enclosure

6F22 lithium

Recommended battery U9VL-JP

Physical Description

The PCB has no LEDs.

Installation

#
1		a) Unscrew x2 countersink screws at the panel named “Battery extension slot” located at the back of the monitoring system case. b) take the panel out.
2		Insert the battery inside VT-ACCU PCB unit. 6F22 9V DO NOT USE RECHARGEABLE BATTERY! Only use Non-rechargeable battery! You can use 9V battery enclosed in standard PP3 enclosure 6F22 (zinc-carbon batteries 400 mAh) 6LR61 (alkaline batteries 565 mAh)
3		Push in the battery case with it’s legs into the PCB gaps.
4		Slide the battery case so that it locks into the PCB.
5		Screw the unit to the panel that we have unscrewed in step one using x2 screws M3.
6		a) Plug the assembly into the monitoring system slot named “Batttery extenion slot”. b) Screw the panel to the enclosure using x2 countersink screws that we have received in step 1.