Content
Documentation page: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/3315859457/VT580+Dust+particles+sensor
Product page:
 |  |
 |  |
Function and purpose
Unique long-term stability
Advanced particle size binning
Superior precision in mass concentration and number concentration sensing
VT580 dust particle sensor is used to monitor air quality and pollution. The sensor is a technological breakthrough in particle matter sensors. Its measurement principle is based on laser scattering and based on innovative contamination-resistance technology. The probe enables precise measurements from its first operation and throughout its lifetime of more than ten years. VT580 has superior precision for different particle matter (PM) types and higher-resolution particle size binning, opening up new possibilities for detecting different sorts of environmental dust and other particles.
Design for:
Air purifiers
HVAC equipment
Demand-controlled ventilation systems
Air conditioners
Air quality and environmental monitors
Smart home and IoT devices
VT580 is an analog sensor and it can be connected to any analog port (A1...A8) of the Vutlan monitoring unit. The sensor is plug-and-play and can be configured for event-triggering via logic schemes.
The maximum amount of VT580 sensors connected to the Vutlan monitoring unit and maximum length can be extended using the "VT408 / Sensor extension unit" or “VT408DIN / Extension unit”.
Connecting the sensor
The sensor can be connected to the system's available analog ports. See the picture below.
Multiple VT580 sensors can be connected to the Vutlan monitoring system using the “VT408 / Extension unit”. See the picture below.
The sensor can also be connected to the “VT408DIN / Extension unit”.
Technical specifications
General parameters | Description |
Type: | Analog sensor |
Usage: | For Air quality and pollution monitoring. |
Technology: | Laser scattering based on contamination-resistance technology with optical particle counters (OPCs) |
Daisy chain connection: | Not possible |
Sensor parameters | |
Mass concentration precision | ±10 % |
Mass concentration range | 0 - 1000 μg/m³ |
Lifetime | more than 10 years |
Particle size range | PM1.0 (0.3 to 1.0 μm), PM2.5 (0.3 to 2.5 μm), PM4 (0.3 to 4.0 μm), PM10 (0.3 to 10.0 μm) |
Hardware parameters | Description/value |
Best used in temperatures | from +10° С to +40° C |
Best used in humidity | from 20% RH to 80% RH |
Operating Temperature: | |
Storage temperature: | |
Operating humidity: | |
Storage humidity: | |
Power Consumption: | |
Installation | |
Cable length: | |
Mounting possibilities: | Wall or ceiling mount |
Output terminal: | RJ-11 / 6P4C |
Max. distance from the unit: | 100 meters from Vutlan controller or from “VT408 / extension unit” or from “VT408DIN / DIN extension unit” |
Other | |
Manufactured in (country): | Manufactured in Slovak Republic, E.U. |
Certification standards: | MCERTS-certified |
HS Code: | |
Drawings
VT580 dimensions:
Installation
1. Press the sensor (without the top cover) against the wall or ceiling. Draw two dots using a pencil where the holes will be drilled.
2. Drill two holes in the wall. Insert plastic dowels. Use two screws to screw the sensor to the wall or ceiling. Close the Top cover.
Package includes
Analog sensor connection
Linked page Analog sensors connection
Sensor configuration
Linked page Sensor configuration
Technology
'VT580 Dust Particle sensor' sensors are optical particle counters (OPCs) based on laser scattering. All OPCs guide ambient, suspended particles to a measurement cell inside the device. The measurement cell consists of a light source (e.g., a laser) and a photodetector. Due to the interaction of particles and light, part of the incoming light is scattered towards the nearby photodetector. The collected signal is converted into real-time particle count and mass concentration values, respectively given in #/cm3 and in μg/m3.
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic