 |  |
Function and purpose
Versatile miniature reader for proximity identifiers. Highly secure, open technology OSDPv2 reader. Resistant against moisture, dust, and vandal-proof. Easy to configure. The reader is always active. The reader is used together with VT485r / OSDPv2 reader extension slot
Features
Tolerates moisture and dust.
Water-proof.
OSDPV2 version.
Works with Mifare Plus cards in SL3 security mode
Reliable optical tamper reduces false tamper alarms.
Low power consumption - smaller energy costs.
Technical specifications
Mifare | |
|---|---|
Reads (Supported formats depends on the firmware) | Mifare, 13.56 MHz, ISO14443A, 4, 7, 10 bytes UID: Mifare Classic 1K/4K, Mifare Standard,Mifare Ultralight, Mifare Hi-Memory, Mifare Plus S 2K, Mifare Plus S 4K, Mifare Plus E 1K, Mifare Plus X 2K, Mifare SE 1K, Mifare Plus X 2K, Mifare X 4K, Mifare Plus EV1 2K, Mifare Plus EV1 4K, Mifare DESfire, Mifare DESfire EV1, Mifare DESfire EV2 NFC, 13.56, ISO 14443/15693 NFCm 13.56 MHz, ISO 14443/15693; RFID, 125 kHz: ASK and SK; 2.4 GHz mobile ID, U-Prox Tag, U-prox Auto Tag |
Read range | NFC, Mifare and RFID 125 kHz - up to 5 cm, 2.4 GHz radio - adjustable 10cm - 15 m |
Interfaces | OSDP |
Ambient | IP65, -40°C to +60°C |
Power | +9…+15 VDC, consumption < 80mA |
Weight | 70g |
Case material and colour | ABS+PC plastic & black |
Wiring and distance | 8 wire cable, OSDP - up to 1000 m |
Warranty | 2 years after the purchase date |
Connecting the reader to VT485r (OSDP)
Connect the reader to Vutlan using VT485r / OSDPv2 reader extension slot
Connect the reader directly to VT485r:
VT485r | Reader U-prox SE Mini conductors | Reader U-prox SE Mini | |
|---|---|---|---|
 | +12 | red | +12V |
A+ | green | A+ | |
B- | white | B- | |
GND | black | GND |
Connect the reader to VT485r using an extension cable:
VT485r | Extension cable conductors | Reader U-prox SE Mini conductors | Reader U-prox SE Mini | |
|---|---|---|---|---|
| +12 | yellow | red | +12V |
A+ | brown | green | A+ | |
B- | green | white | B- | |
GND | white | black | GND |
Configure U-prox SE mni
The reader should have the following options:
Factory reset: Yes
Output interface: OSDP
In reading card: Absent
Conductors
Conductor | Color |
|---|---|
+12V | Red |
GND | Black |
Data0 (WD0) | Green |
Data1 (WD1) | White |
Red LED (RD) | Brown |
Green LED (GN) | Orange |
Beep | Blue |
Hold or sync | Yellow |
Drawings
Picture | Description |
|---|---|
-01.jpg?version=2&modificationDate=1712666540705&cacheVersion=1&api=v2&width=518&height=622) | Reader |
-02.jpg?version=1&modificationDate=1712666540597&cacheVersion=1&api=v2&width=502&height=681) | Mount plate |
Installation
# | Pictures | Decription |
|---|---|---|
1 |  | Unscrew the M3 bolt from the reader. |
2 |  | User a screwdriver to push out two back panels from the reader. Pull the mount plate marked in orange from the reader. |
3 |  | The mount plate (back panel) can be installed on to a wall using dowels and screws. Warning: Range decreases on metal surfaces. |
4 |  | Screw M3 screw back in |
Copyright:
Vutlan s.r.o.
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic, E.U.
www.vutlan.com