Sending trap by the event from the door sensor
1. Rename the door sensor for convenience. To invert the state of the sensor use Reversed.
2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in Door Sensor Alarm trap.
3. Use «Send test message» to send a test notification. Finally it should be something like this:
4. Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.
5. When Door sensor will pass in Alarm status, Door Sensor Alarm Trap will be sent.
Sending trap by the event from a temperature sensor
1. Rename Temperature Sensor. Use the slider to set the sensor thresholds.
2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in Temperature Sensor Alarm Trap.
3. Use «Send test message» to send a test notification. Finally it should be something like this:
4. Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.
5. When Temperature Sensor will pass in Alarm status, Temperature Sensor Alarm Trap will be sent.
Sending trap by the event from a humidity sensor
1. Rename Humidity Sensor. Use the slider to set the sensor thresholds.
2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in Humidity Sensor Trap.
3. Use «Send test message» to send a test notification. Finally it should be something like this:
4. Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.
5. When Humidity Sensor will pass in Alarm status, Humidity Sensor Alarm Trap will be sent.