AC. DC metering
Connect AC, and DC transceiver with a supplied RJ-11 (6P4C) or RJ-12 (6P6C) cable to any analog port "A1 .. A8" or "Sensor" port. Determination of the sensor type and connection will occur automatically. Connect transceivers to AC, and DC meters by any 2/4 wire cable.
developer notes: change the picture (add change)
This procedure applies to the following AC, and DC devices, which are supported by the appliance and are connected to the analog ports:
| AC DC transceivers | Metered | Isolation | Connected AC, DC meter | |
|---|---|---|---|---|
| 1 | Current transmitter (VT407) | 0-5 V | □ | HAT-100V1 |
| 2 | DC monitor (VT410) | 0-75 V | 1 kV | □ |
| 3 | Current Loop transceiver (VT420) | 4-20 mA | 1 kV | 4-20mA outputs |
For VT410 use only a 3-pair (6P6C) cable for sensor connection!
Connect transceiver to the monitoring unit
