TRAP is a notification element, that sends trap message (Trap-PDU) from the monitoring system (agent) to the network management base station (SNMP manager).
Trap element supports the formation of SNMP trap messages ver. 1, 2c and 3.
Warning
Managing Traps
It is possible to create, to configure and to delete Trap elements only via the web interface. See the documentation for more details: SNMP Traps notification.
Trap string description line
When user send a trap message, a trap string description is formed, for example:
Trap (name: trap_1, ID: 602001) was worked. Time: 10: 40: 32 2016/11/19 Logic: 'Logic_1', Element: 'Onboard Temperature', in state: 'high alarm', value: '25.00'
where:
- trap_1 - trap element name;
- 602001 - trap element ID.
You can change the name of the Trap element in the table ctlNotifiers.ctlNotifiersTrapsTable.ctlNotifiersTrapsEntry or in the system web interface.
In addition, the following variables are passed in the message body:
Variables | Description |
|---|---|
| .1 | Description of the logic scheme that has triggered |
| .2 | Readings of sensors in the logic scheme |
| .3 | Logic scheme response time |
| .4 | Name of the logic scheme |
| .5 | Name of the sensor whose state led to the triggering of the logic circuit |
| .6 | The state of the sensor that triggered the operation of the logic circuit |
| .7 | The value measured by the sensor or the logic level |
| .8 | ID of the sensor that triggered the logic circuit |
| .20 | ID of SNMP trap |
| .21 | Name of SNMP trap |
Example of the contents of received trap:
