Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Product page: https://vutlan.com/analog-sensors/16-vt510-humidity.html

Datasheet page: https://vutlan.atlassian.net/l/cp/121FNA2f

Function and purpose

The sensor is needed for the measurement of relative humidity of 10-95% indoors. VT510 relative accuracy is 3%.

VT500 is an analog plug-and-play sensor.

Can be connected to any analog port (A1...A8) of the Vutlan monitoring unit.

The maximum amount of sensors connected to a Vutlan monitoring unit and the maximum length away from the monitoring unit can be extended using the "VT408 / Sensor extension unit"

Technical specifications

VT510
1

Product dimensions

(Length, Width, Height) 60×18×18 mm

2

Power Consumption

60 mW

3

Operating temperature

Temperature: Min. -10° C - Max.+80° C

4

Mounting possibilities

Desktop and Wall mount

5

Max. distance from the unit

50 m

6

Manufactured in (country)

Manufactured in Slovak Republic, E.U.

7

HS Code

9025 11 800

8

Special Features

Accuracy 3% RH

9

Inputs terminals

RJ-12 / RJ-11

Drawings

Package includes

Package content

Description

Quantity

1

Sensor

1 pc

2

RJ11 6P4C 2m telephone cable

1 pc

3

Screw B4,2 x 16

1 pc

4

Sticker

1 pc

Package specifications

Feature
Description

Packaging weight

60 g

Connecting vibration sensor

The sensor uses a standard Vutlan analog sensor cable for connecting to the monitoring unit. You can find further instructions at Analog sensors connection

Installation using a sticker and a bracket

Option 1.

There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted on walls using a screw. In the current example, it is not needed. If you are planning to mount a device differently, do not follow this step.

Cut the round bump using a knife so that the bottom of the plastic enclosure will be flat.


Option 2.

a) Stick the mounting sensor to the surface using the sticker.

or

b) Stick a sensor to the surface using a screw.


Option 3.

Mount the sensor to the surface using a mounting bracket. The mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.

Cable pinouts

The sensor uses a standard Vutlan analog sensor cable for connecting to the monitoring unit.  You can find further instructions in our online documentation: Analog sensors connection

Copyright:

Vutlan s.r.o. (LLC)

Remote Infrastructure Monitoring and Control

43 ul.Svornosti, 821 06 Bratislava,

Slovak Republic

  • No labels