...
To update the software via the interface (HTTP), first, upload the appropriate driver from our "drivers" section.
Then go "System menu" >> "Firmware" tab >> "Upload source" >> "From local filesystem" >> "Select file".
Select driver upgrade file upgrade file and press "OK". After the update is complete the web interface displays the message "Firmware uploadUpload".
Upgrade files may have different names:
...
The updating process is indicated by LEDs on the front panel of the device: file installation is indicated by switching ERR, the end of the installation process is indicated by a short-term increase in switching frequency ACT. Then all the lights switches switch off - the system is rebooted. Completion is indicated by switching reboot ACT.
| Warning |
|---|
Do not restart the device by you on your own at this moment, this may damage the program and require a full flashing. |
...