Page Comparison

Dynamic DNS is used to assign a persistent domain name to a device. The device allows to update updating the Domain Name System to a point to a changing IP Address in an automatic regime. Example  Example of setting up Dynamic DNS service on up Dynamic DNS service on no-ip.com:

• Register on no-ip.com or

  login

  log in using an existing account.

• Create a host on no-ip.com: "Add Host". Host parameters: Hostname - the name of the host, type: DNS Host (A), Ip Address: do not change, it will be automatically updated by the device

• Go to web

  -

  interface of the monitoring device "Preferences"->"Network".  Select "Enable DynDNS".  Select service: No-

  ip

  IP (www.no-ip.com), type in Login, Password, and Hostname which you put in no-ip.com.  Save settings "Save".

• The device should update the IP address for the Hostname host after 1 minute.  You can check this in the no-ip.com service.

   After

   After some time the service will match the IP address and Hostname.

•  Using

   Using the Hostname in the browser open the web

  -

  interface of the device.  If the host does not work try to use an IP address

  which

  that will install the device on the no-ip.com service for the Hostname.  If the IP address does not work as well, this can happen if port 80 is closed and does not allow you to host a server in your local network.

...