Notifications are intended to inform the user about events occurring in the monitoring system.
...
To test the notification you can press "Send test message".
Notification via E-mail
To create notification via e-mail you have to specify the following parameters:
...
Contact your mail administrator for assistance with configuring SMTP parameters or the help section of your e-mail provider.
Notification via SNMP Trap
To create notification via e-mail you have to specify the following parameters:
| Parameter | Description |
|---|---|
| Name | The name of the element in the system |
| SNMP server | Name or SNMP server IP address (192.168.1.10) |
| SNMP port | SNMP port (usually 162). |
| Community | Community name (public) |
| Version | Version (v1 or v2c) |
Notification via SMS
To create notification via SMS you have to specify the following parameters:
| Parameter | Description |
|---|---|
| Name | The name of the element in the system |
| Phone number | Phone number of receiver (+421908315000) |
| Message | Text of the message |
| Note |
|---|
Attention! In order for SMS to display correct time, make sure you have set the correct time zone in "Preferences" >> "Network" before sending SMS. The time zone has to be the same as the time zone of your browser ( Operating system). See section Creating notifications (driver version up to 2v2.0.1 - v2.2.45). |
Macros in the notification text
The text of the message can include macros. Macros have the following form:
...