Content
| Table of Contents | ||
|---|---|---|
|
 |  |
 |
Function and purpose
VT-6F22 BAT / Reservation battery 9V is an extension module that can be purchased separately.
Keep your Vutlan monitoring systems operational with the VT-BAT 6F22 9V Backup Battery while the main power source is disabled. Designed for emergency use during power failures, this non-rechargeable battery provides dependable backup to safeguard your critical infrastructure when needed most.
The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.
It is used for VT604t, VT825t, and VT855t.
| Note |
|---|
You can use 9V battery enclosed in standard PP3 enclosure
Recommended battery U9VL-JP |
| Note |
In development. Coming soon. |
Physical Description
The PCB has no LEDs.
Installation
# |
|
| ||||
|---|---|---|---|---|---|---|
1 |   | a) Unscrew x2 countersink screws at the panel named “Battery extension slot” located at the back of the monitoring system case. b) take the panel out. | ||||
2 |  | Insert the battery inside VT-ACCU PCB unit. 6F22 9V
| ||||
3 |  | Push in the battery case with it’s legs into the PCB gaps. | ||||
4 |  | Slide the battery case so that it locks into the PCB. | ||||
5 |   | Screw the unit to the panel that we have unscrewed in step one using x2 screws M3. | ||||
6 |  | a) Plug the assembly into the monitoring system slot named “Batttery extenion slot”. b) Screw the panel to the enclosure using x2 countersink screws that we have received in step 1. |
Package content
| Include Page | ||||
|---|---|---|---|---|
|
...