Page Comparison

...

Product page: https://vutlan.com/analog-sensors/55-vt593-spot-leak-sensor.html

Datasheet page: https://vutlan.atlassian.net/wiki/x/AQAkqQ

Image Added

Image Added

Keywords: #leak #leakage #spot #water #sensor #spot leak sensor #zone #floor #drip #fluid

Function and purpose

The sensor VT593 Spot Leak Sensor detects water by increasing capacitance on measuring an increase in capacitance between two metal poles . The detector is encapsulated in plastic housing. Due on the spot, all housed within a durable plastic casing. Unlike traditional metal-based sensors, it resists corrosion over time thanks to the low applied voltages and the applied leakage detection principle, it does not rust over time.

Product page: https://vutlan.com/analog-sensors/169-vt593-spot-leak-sensor.html

Dimensions

...

Usage example

...

non-corrosive detection method. This design makes it ideal for long-term applications in environments prone to leaks.

The sensor is compatible with any analog port of the Vutlan monitoring unit and is easy to integrate. Its scalability is enhanced by the VT408/Sensor extension unit, allowing you to increase both the number of sensors and the overall length of the sensor network.

Use cases

1. Data Centers: It can detect water leaks under raised floors on the spot or near critical equipment, preventing costly damage to IT infrastructure.

2. Industrial Facilities: Helps monitor areas prone to leaks, such as around or under machinery, boilers, heaters, or under piping systems.

3. Residential and Commercial Spaces: Used to detect leaks in kitchens, bathrooms, boilers, and near appliances such as washing machines, and boilers.

4. Water Level Meter: The sensor can be used to detect if the water has reached a particular height. For example in a water tray.

This sensor is ideal for long-term monitoring where corrosion could be an issue, and it works seamlessly with Vutlan systems for comprehensive monitoring.

Dimensions

...

Usage example

...

Other installation examples of similar sensors for leak detection can be found in our articles "Water leakage detection using cable sensor and spot sensor" and "Leak detection under raised floors in data centers".

Technical specifications

Image RemovedImage Added	VT593 / Spot leak sensor specifications
Description	The sensor has two RJ connectors. RJ 6P4C connects to the analog port of Vutlan monitoring system. RJ 4P2C connects the leak detector with two poles.
Sensor type:	Analog
Dimensions	60×18×18 mm
Weight	60 g
Input	2 wire (WDC cable)	Detection	CapacitiveSLD / Spot leak detector)
Output	x1 RJ11 / RJ12 (6p4c), 6p4c
Detection	Capacitive
Operating temperature	from -10 °C to +80 °C
Operating humidity	from 5% to 95% (Non-Condensing)
Mounting	Mounting bracket included.
Power consumption	60mW
Max. distance m	100 m
HS Code	9025 80 400
Components	Manufactured in E.U.
Special features	from the monitoring unit or VT408 Analog Sensor Extension Unit
Response time:	15 sec., s
Recovery time:	Depends on how fast the sensor dries out

Image Removed

Manufactured in	Slovak Republic, E.U.
HS Code	9025 80 400
GTIN	8588009886228

Image Added	SLD / Spot leak detector specifications
Description	The detector is used in combination with the "VT593 / Spot leak sensor" for level monitoring of conductive liquids in containers, pits, cellars, etc. The sensor has two stainless steel poles. The detector is encapsulated in plastic housing for conductive liquids. The sensor can be connected to dry contact inputs (e.g. an alarm system). Can be placed near plumbing, trays, raised floors, under equipment, sinks, aquariums, sump pumps, refrigerators, dishwashers, toilets, basements, washing machines, water heaters, and garages.
Detectable liquids	Clean, polluted & distilled water; acids; alkalis; alcohols, and other electrically conductive liquid
Dimensions	30x20x8 30 x 20 x 8 mm
LengthsCable length	1 -meter cablem
Weight	21 g with cable
Operating humidity	20%RH～100%	Working from 20 to 100 % RH
Operating temperature	from -10℃～50℃10℃ to 50℃
Outputs	Two wires, RJ 4P2C plug.
Output form	NO normally open
Special features	The measuring electrodes are resistant to chlorine Chlorine and salt water Salt Water (stainless steel AISI 316 / V4A)

Package content

Linked page VT593 Water spot detector package content

Installation

Installing the sensor case	Steps
Image RemovedImage Added	Cut off the ledge at the bottom of the case. Info The ledge at the bottom of the case is used for installation inside IT racks.
Image RemovedImage Added	The sensor can be installed using a screw or a sticker
Image RemovedImage Added

Installing the detector	Steps
Image RemovedImage Added	The detector can be installed differently depending on the end purpose and the the surface. See below options: A: For non-conductive surfaces. B: For conductive surfaces. C: For liquid level detection. D: For installing on to vertical surfaces for level detection.
Image RemovedImage Added	The detector can be installed onto a surface using a screw or a sticker. The detector has a hole in the middle for a screw to fit it.
Image RemovedImage Added

Connecting the sensor

...

1. Connect the "VT593 / Spot leak sensor" to the monitoring unit into any available analog port. The connection is plug-an-play. Use RJ11/12 6p4c to RJ11/12 6p4c cable.

2. Connect the "SLD / Spot leak detector" to the "VT593 / Spot leak sensor".

Analog sensor connection

...

Linked page https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1016274/Analog+sensors+connection

Sensor configuration

Linked page https://vutlan.atlassian.net/wiki/spaces/DEN/pages/1016314/Sensor+configuration

Cable pinouts

1. The sensor uses a standard Vutlan analog sensor cable (RJ11/RJ12 6P4C to RJ11/RJ12 6P4C) for connecting to the monitoring unit. You can find further instructions in the Analog sensors connectionSensors Connection article

2. The detector uses two wires. It has a black and red wire. Plus or minus is irrelevant.

Troubleshooting

The following table describes potential problems and their possible causes. It also describes checks you can perform or possible solutions for each. After referring to this table, if you cannot resolve the problem, contact your local Vutlan sales representative for assistance.

Frequently asked questions

...