...
1. "TR" - is the the nearest switch to CAN inputs. This switch should be turned "ON" on the last sensor in the CAN chain.The last sensor in long chain with length more then 10 meters, terminator should be in "OFF" position.
"FR" - the memory switch, is necessary for reprogramming the module (the switch remote from the CAN connectors).
| Note |
|---|
Do not use DIP switch "FR", it should always be OFF. If this switched is turned ON, the module will turn off. This switch is only needed for programming purposes! |
...
4. "LEDs" - LEDs: "RUN" - indicates appliance connection status to the main module, "ERR" - indicates appliance lost connection to the main module.
5. "AccessPIR" - Door IR access sensor. Use white sticker supplied to control the door open/closed.
...